TTTRF2000 Datasheet, PDF (1/1 Pages) Coilcraft lnc. – Surface Mount Tip and Ring Filters

Document 156
Surface Mount Tip and Ring Filters
TTTRF2000
1
4
8
5
TTTRF4000
1
3
2
4
8
6
7
5
4
0.050
1,27
typ
5
0.050
1,27
cen
0.008ref
0,20
05.1,0938 _max
1
0.320
8,13
max
8
0.030
0,76
typ
03.1,9545max
0.060
1,52
Recommended
Land Pattern
5
4
6
3
7
2
8
1
0.200
5,08
0.030
0,76
ref
0.020
0,51
Weight:
0.27 – 0.29 g
Termination: Tin-silver-copper over silver-platinum
Tape and reel: 500/7″ reel; 2200/13″ reel 16 mm tape width
For packaging data see Tape and Reel Specifications section.
These surface mount tip and ring filters provide substan-
tial reduction of noise throughout an extended frequency
range. They’re packaged in a flat-top ceramic header for
reliable pick and place operations and optimal thermal
characteristics.
Parts are manufactured with lead-free solder that make
them compliant with RoHS standards.
Part number¹
TTTRF2000L_
Lines
1
Minimum inductance:
35 µH
(each winding @130 kHz)
Rated current:
500 mA
DCR each winding:
0.075 ⏲ max
Dielectric strength:
1500 Vrms
(1–8)
TTTRF4000L_
2
35 µH
500 mA
0.135 ⏲ max
1500 Vrms
(1,2–7,8)
1. When ordering, please specify packaging code:
TTTRF4000LC
Packaging: C = 7″ machine ready reel. EIA-481 embossed plastic
tape, 500 parts per full reel.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked, 2200 parts
per full reel.
2. Operating temperature range –40°C to +85°C.
3. Electrical specifications at 25°C.
Typical Response*
-10
Differential Mode
0
10
20
Common _Mode
30
40
0.1
1
10
100
Frequency (MHz)
*Measured on Agilent/HP 8753D network analyzer.
1000
Specifications subject to change without notice.
Please check our website for latest information. Document 156 Revised 05/19/05
© Coilcraft, Inc. 2005