ST466PJD Datasheet, PDF (1/3 Pages) Coilcraft lnc. – Coupled Inductors for Critical Applications

5030 COUPLED INDUCTORS
Coupled Inductors for Critical Applications
0.189 ±0.003
4,80 ±0,076
1
4
0.189 ±0.003
4,80 ±0,076
2 ^{XXX X} 3
Dot indicates pin 1
Dash
number
Internal
code
0.114 ±0.004
2,90 ±0,10
0.134 0.090
3,40 2,30
Suggested
Land Pattern
0.138
3,50
0.090
2,30
0.030
0,75
45°
typ
0.197
5,00
0.060
1,52
1
4
L1
L2
2
3
0.059
1,50
0.134
3,40
0.197
5,00
Dimensions
are in
inches
mm
The ST466PJD coupled miniature shielded inductors are
only 3 mm high and 5 mm square. They are ideal for use
in a variety of circuits including flyback, multi-output buck
and SEPIC.
These inductors provide high inductance, high efficiency
and excellent current handling in a rugged, low cost part.
They can also be used as two single inductors connected
in series or parallel or as a common mode choke.
+
D
L1
L2
C
V_IN
C
SW
+
V_OUT
–
–
Typical Flyback Converter
L2 ^{D C}
+
V_OUTAUX
–
+
+
L1
V_IN
D
SW
C
V_OUT
–
–
Typical Buck Converter with auxiliary output
+
L1
V_IN
Q
C1
L2
D
C
+
V_OUT
–
–
Typical SEPIC schematic
Core material Ferrite
Core and winding loss See http://www.coilcraft-cps.com/coupledloss
Weight  210 – 225 mg
Terminations  RoHS compliant, halogen free silver-palladium-plati-
num-glass frit. Other terminations available at additional cost.
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –55°C to +125°C.
Packaging: –55°C to +80°C
Winding to winding isolation  100 V
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 750 per 7″ reel  Plastic tape: 12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
© Coilcraft, Inc. 2012
Document ST757-1  Revised 09/06/12
®
1102 Silver Lake Road
Cary, IL 60013
Phone [phone]
Fax [phone]
Email [e-mail]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.