ST450PHD Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Coupled Inductors for Critical Applications

1812 COUPLED INDUCTORS
Coupled Inductors for Critical Applications ST450PHD
• Coupled inductors optimized for xDSL filtering applications
• Can be used as a common mode choke, 1:1 transformer or
in SEPIC applications
Core material Ferrite
Terminations  RoHS compliant gold over nickel over moly-manganese.
Other terminations available at additional cost.
Weight  0.30 – 0.36 g
Ambient temperature  –40°C to +85°C with Imax current, +85°C to
+125°C with derated current
Storage temperature  Component: –55°C to +125°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging  600/7″ reel; 2200/13″ reel  Plastic tape:  12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 3.9 mm pocket depth
PCB washing  Only pure water or alcohol recommended

L DCR SRF
 ±20%² Q max min  Isat⁴ Imax
Part number¹ (µH)  min³ (Ohms) (MHz) (mA) (mA)
ST450PHD102ML_ 1.0 38
ST450PHD222ML_ 2.2 29
ST450PHD472ML_ 4.7 43
ST450PHD103ML_ 10 35
ST450PHD153ML_ 15 37
0.20 285
0.33 175
0.41 102
0.74 74
0.96 65
2400 2100
1500 1200
1500 1000
800 780
700 710
ST450PHD223ML_ 22
ST450PHD393ML_ 39
ST450PHD473ML_ 47
38 1.84
39 2.60
40 2.66
54 500 530
5.7 450 420
4.8 400 390
1. When ordering, please specify termination and testing codes:
ST450PHD473MLZ
Termination: L = Silver-palladium-platinum-glass frit terminations
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
2. Per winding. Tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. Q measured at 1 MHz.
4. DC current at which the inductance drops 10% (typ) from its value
without current.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
B
C
4
E
1
D
1
4
AF
H
G
2
3
0.015
0,38
1
0.057
1,45
4
0.020
0,51
0.115
2,92
2
3
0.048
1,22
0.018
0,46
ReScuogmgmesetneded
LLaanndd PPaatttteern
Pad Detail
0.020
0,51
0.015 _ref
0,38
0.030 ±0.002
0.040 _min 0,76 ±0,05
1,02
A
B
C
DE
F
G
max max max ref ref ref min H
0.231 0.196 0.150 0.107 0.100 0.178 0.04 0.03 inches
5,87 4,98 3,81 2,72 2,54 4,52 1,02 0,76 mm
Note: Termination dimensions are before optional solder application.
For maximum termination dimensions including solder, add
0.006 in / 0,15 mm.
© Coilcraft, Inc. 2012
®
Specifications subject to change without notice.
Please check our website for latest information. Document ST248-1  Revised 03/14/12
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com