ST413RAE Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors for Critical Applications

1008 CHIP INDUCTORS
Chip Inductors for Critical Applications ST413RAE
These chip inductors have been designed especially for
high frequency applications. Their ceramic construction
delivers the highest possible SRF and excellent Q values.
The non-magnetic coilform also ensures the utmost in
thermal stability, predictability and batch consistency.

Part number¹
ST413RAE100JLZ
ST413RAE120JLZ
ST413RAE150JLZ
ST413RAE180JLZ
ST413RAE220JLZ
ST413RAE270_LZ
ST413RAE330_LZ
ST413RAE390_LZ
ST413RAE470_LZ
ST413RAE560_LZ
ST413RAE680_LZ
ST413RAE820_LZ
ST413RAE101_LZ
ST413RAE121_LZ
ST413RAE151_LZ
ST413RAE181_LZ
ST413RAE221_LZ
ST413RAE271_LZ
ST413RAE331_LZ
ST413RAE391_LZ
ST413RAE471_LZ
ST413RAE561_LZ
ST413RAE621_LZ
ST413RAE681_LZ
ST413RAE751_LZ
ST413RAE821_LZ
ST413RAE911_LZ
ST413RAE102_LZ
  _Inductance2
(nH)
10 @ 50 MHz
12 @ 50 MHz
15 @ 50 MHz
18 @ 50 MHz
22 @ 50 MHz
27 @ 50 MHz
33 @ 50 MHz
39 @ 50 MHz
47 @ 50 MHz
56 @ 50 MHz
68 @ 50 MHz
82 @ 50 MHz
100 @ 25 MHz
120 @ 25 MHz
150 @ 25 MHz
180 @ 25 MHz
220 @ 25 MHz
270 @ 25 MHz
330 @ 25 MHz
390 @ 25 MHz
470 @ 25 MHz
560 @ 25 MHz
620 @ 25 MHz
680 @ 25 MHz
750 @ 25 MHz
820 @ 25 MHz
910 @ 25 MHz
1000 @ 25 MHz
Percent ^  SRF min^{4  } DCR max⁵
tolerance ^  Q min³
(MHz)
(Ohms)
5
50 @ 500 MHz
3000
0.08
5
50 @ 500 MHz
3000
0.09
5
50 @ 500 MHz
3000
0.14
5
50 @ 350 MHz
2500
0.11
5,2,1
55 @ 350 MHz
2000
0.12
5,2,1
55 @ 350 MHz
1500
0.13
5,2,1
60 @ 350 MHz
1500
0.14
5,2,1
60 @ 350 MHz
1500
0.15
5,2,1
65 @ 350 MHz
1350
0.16
5,2,1
65 @ 350 MHz
1150
0.18
5,2,1
65 @ 350 MHz
1050
0.20
5,2,1
60 @ 350 MHz
950
0.22
5,2,1
60 @ 350 MHz
950
0.56
5,2,1
60 @ 350 MHz
900
0.63
5,2,1
45 @ 100 MHz
850
0.70
5,2,1
45 @ 100 MHz
700
0.77
5,2,1
45 @ 100 MHz
600
0.84
5,2,1
45 @ 100 MHz
550
0.91
5,2,1
45 @ 100 MHz
500
1.05
5,2,1
45 @ 100 MHz
465
1.12
5,2,1
45 @ 100 MHz
425
1.19
5,2,1
45 @ 100 MHz
415
1.33
5,2,1
45 @ 100 MHz
375
1.40
5,2,1
45 @ 100 MHz
340
1.47
5,2,1
45 @ 100 MHz
330
1.54
5,2,1
45 @ 100 MHz
325
1.61
5,2,1
35 @ 50 MHz
305
1.68
5,2,1
35 @ 50 MHz
290
1.75
Imax
(mA)
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
650
650
580
620
500
500
450
470
470
400
300
400
360
400
380
370
1. When ordering, specify tolerance, termination and testing codes:
ST413RAE102JLZ
Tolerance: F = 1%  G = 2%  J = 5%
Termination: L = RoHS compliant silver-palladium-platinum glass frit.
Special order:
S = Tin-lead (63/37) over silver-platinum-glass frit.
T = Tin-silver-copper (95.5/4/0.5) over silver-platinum-
glass frit.
Testing:
Z = COTS
H = Screening per Coilcraft CP-SA-10001
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
4. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
5. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF840 test fixture.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Core material Ceramic
Terminations  Silver-palladium-platinum-glass frit. Other termina-
tions available at additional cost.
Ambient temperature  –40°C to +125°C with Imax current, +125°C
to +140°C with derated current
Storage temperature  Component: –55°C to +140°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +25 to +155 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging  2000 per 7″ reel  Plastic tape:  8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.8 mm pocket depth
© Coilcraft, Inc. 2012
Document ST160-1  Revised 11/06/12
®
1102 Silver Lake Road
Cary, IL 60013
Phone [phone]
Fax [phone]
Email [e-mail]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.