|
ST358PWA Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Power Inductor for Critical Applications | |||
|
2014 POWER INDUCTORS
Power Inductor for Critical Applications ST358PWA
â Miniature shielded power inductors; 2.0 Ã 2.0 mm footprint
â Extremely low DCR and very high SRF ratings
â Isat ratings as high as 2.8 A
Core materialâFerrite
Terminationsâ Tin-silver-copper over tin over nickel over silver.
Weightâ 20 â 25 mg
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â55°C to +125°C.
Packaging: âC to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Packagingâ 2000/7â³ reel; 7500/13â³ reelâ Plastic tape:â 8 mm wide,
0.28 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth
â Part number1
ST358PWA271MLZ
ST358PWA421MLZ
ST358PWA601MLZ
ST358PWA821MLZ
ST358PWA102MLZ
ST358PWA152MLZ
ST358PWA222MLZ
ST358PWA332MLZ
ST358PWA472MLZ
ST358PWA682MLZ
ST358PWA822MLZ
ST358PWA103MLZ
â Inductance2
±20% (µH)
0.27
0.42
0.60
0.82
1.0
1.5
2.2
3.3
4.7
6.8
8.2
10
â DCR nom3 â DCR max3
(Ohms) (Ohms)
0.030
0.037
0.043
0.051
0.059
0.036
0.044
0.052
0.061
0.071
0.075
0.120
0.152
0.231
0.287
0.086
0.132
0.167
0.254
0.316
0.378
0.440
0.416
0.459
â SRF typ4 â Isat (A)5 âââââââIrms (A)6
(MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise
570
1.50
2.30
2.80
2.04
2.73
438
1.40
2.00
2.40
1.93
2.57
290
1.20
1.80
2.25
1.83
2.43
163
0.950
1.40
1.75
1.49
2.03
153
0.900 1.30
1.68
1.43
1.94
109
0.720 1.20
1.60
1.34
1.86
80
0.600
0.980
1.30
1.07
1.42
62
0.540
0.800
1.10
0.923
1.23
46
0.380
0.650
0.880
0.788
1.06
44
0.350
0.590
0.800
0.676
0.915
39
0.290
0.500
0.680
0.640
0.849
33
0.250
0.450
0.600
0.564
0.729
1. When ordering, please specify testing code:
ST358PWA103MLZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at which the inductance drops from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
© Coilcraft, Inc. 2011
®
Specifications subject to change without notice.
Please check our website for latest information. Document ST583-1â Revised 04/14/11
1102 Silver Lake Road
Cary IL 60013
Phone 800-981-0363
Fax 847-639-1508
E-mail cps@coilcraft.com
Web www.coilcraft-cps.com
|
▷ |