ST336RAM Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors for Critical Applications

0805 FERRITE CHIP INDUCTORS
Chip Inductors for Critical Applications ST336RAM
■ Higher inductance values than ceramic 0805 inductors
■ Heavy guage wire for low DCR
■ Ferrite construction for high current handling

Part number¹
ST336RAM111JRZ
ST336RAM681JRZ
ST336RAM102JRZ
ST336RAM122JRZ
ST336RAM152JRZ
ST336RAM182JRZ
ST336RAM222JRZ
ST336RAM272JRZ
ST336RAM332JRZ
ST336RAM472JRZ
ST336RAM682JRZ
ST336RAM103JRZ
ST336RAM153JRZ
ST336RAM223JRZ
 Inductance²
±5% (µH)
0.11 @ 7.9 MHz
0.68 @ 7.9 MHz
1.0 @ 7.9 MHz
1.2 @ 7.9 MHz
1.5 @ 7.9 MHz
1.8 @ 7.9 MHz
2.2 @ 7.9 MHz
2.7 @ 7.9 MHz
3.3 @ 7.9 MHz
4.7 @ 7.9 MHz
6.8 @ 7.9 MHz
10 @ 2.5 MHz
15 @ 2.5 MHz
22 @ 2.5 MHz
 Q min³
Impedance typ
(Ohms)
14 @ 7.9 MHz   370 @ 500MHz
15 @ 7.9 MHz   430 @ 100 MHz
13 @ 7.9 MHz   670 @ 100 MHz
15 @ 7.9 MHz   860 @ 100 MHz
16 @ 7.9 MHz
1000 @ 100 MHz
16 @ 7.9 MHz
1360 @ 100 MHz
15 @ 7.9 MHz   840 @ 50 MHz
15 @ 7.9 MHz
1050 @ 50MHz
15 @ 7.9 MHz
1670 @ 50 MHz
14 @ 7.9 MHz   950 @ 25 MHz
14 @ 7.9 MHz   450 @ 10MHz
14 @ 2.5 MHz   740 @ 10 MHz
13 @ 2.5 MHz
1300 @ 10MHz
13 @ 2.5 MHz
1620 @ 10 MHz
 SRF min⁴   DCR max⁵
(MHz)
(Ohms)
1000
0.05
340
0.30
280
0.39
300
0.64
225
0.74
240
0.98
90
0.98
80
1.16
65
1.20
40
1.50
28
1.90
18
2.20
15
4.25
15
6.70
Imax
(mA)
700
410
360
260
250
210
190
190
190
170
150
130
90
75
Color
code
Brown
Orange
Yellow
Brown
Green
Blue
Brown
Violet
Gray
Black
Brown
Red
Yellow
Green
1. When ordering, please specify termination and testing codes:
ST336RAM223JRZ
Termination: R = RoHS compliant matte tin over nickel over silver-
platinum-glass frit.
Special order:
Q = RoHS tin-silver-copper (95.5/4/0.5) over tin over
nickel over silver-platinum-glass frit or
P = non-RoHS tin-lead (63/37) over tin over nickel over
silver-platinum-glass frit.
Testing: Z = COTS
H = Screening per Coilcraft CP‑SA‑10001
2. Inductance measured at 0.1 Vrms, using Coilcraft SMD-A fixture in
Agilent/HP 4286A impedance analyzer or equivalent with Coilcraft-
provided correlation pieces.
3. Q measured on Agilent/HP 4291A with Agilent/HP 16197A test fixture
or equivalents.
4. SRF measured using Agilent/HP 8753ES network analyzer or
equivalent with Coilcraft SMD‑D test fixture.
5. DCR measured on a Keithley 580 Micro-ohmmeter or equivalent with
a Coilcraft CCF858 test fixture.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
B
overall
F
A
G
F
C
D
H
Pick and
place
material
I
J
I
E
terminal
Terminal wraparound:
approx 0.008/0,20 both ends
ReScuogmgemsetend ed
L^La^anⁿd^dP^Pa^at^tt^te^er^rnⁿ
ABCD
max max max ref E F G H I J
0.090 0.068 0.060 0.020 0.050 0.016 0.040 0.070 0.040 0.030 inches
2,29 1,73 1,52 0,51 1,27 0,41 1,02 1,78 1,02 0,76 mm
Note: Dimensions are before optional solder application. For maximum
overall dimensions including solder, add 0.0025 in / 0,064 mm to B
and 0.006 in / 0,15 mm to A and C.
Core material Ferrite
Terminations  RoHS compliant matte tin over nickel over silver-
platinum-glass frit.
Weight  16.7 – 18.0 mg
Ambient temperature  –40°C to +85°C with Imax current, +85°C to
+100°C with derated current
Storage temperature  Component: –55°C to +100°C.
Packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging  2000/7″reel;
Plastic tape:  8 mm wide, 0.23 mm thick, 4 mm pocket spacing,
1.6 mm pocket depth
®
Specifications subject to change without notice.
Please check our website for latest information. Document ST781-1  Revised 09/01/11
© Coilcraft, Inc. 2011
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com