ST336RAD Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Chip Inductors for Critical Applications

0805 CHIP INDUCTORS
Chip Inductors for Critical Applications ST336RAD
These inductors provide exceptional Q values, even at
high frequencies. They have a ceramic body and wire
wound construction to provide the highest SRFs, tight
inductance tolerance and batch consistency.
This robust version of Coilcraft’s standard 0805HQ series
features high temperature materials that allow operation
in ambient temperatures up to 155°C.
 Inductance²
Part number¹
(nH)
ST336RAD2N5JLZ
ST336RAD5N6JLZ
ST336RAD6N2JLZ
ST336RAD12NJLZ
ST336RAD16N_LZ
2.5 @ 250 MHz
5.6 @ 250 MHz
6.2 @ 250 MHz
12 @ 250 MHz
16 @ 250 MHz
ST336RAD18N_LZ
ST336RAD20N_LZ
ST336RAD27N_LZ
ST336RAD30N_LZ
ST336RAD39N_LZ
18 @ 250 MHz
20 @ 250 MHz
27 @ 250 MHz
30 @ 250 MHz
39 @ 250 MHz
ST336RAD48N_LZ
ST336RAD51N_LZ
48 @ 200 MHz
51 @ 200 MHz
Percent  SRF min⁴
tolerance
Q min³
(GHz)
5
56 @ 1000 MHz
>5.00
5
83 @ 1000 MHz
4.88
5
80 @ 1000 MHz
4.55
5
52 @ 500 MHz
2.80
5,2
72 @ 500 MHz
2.40
5,2
70 @ 500 MHz
2.20
5,2
54 @ 250 MHz
2.05
5,2,1
58 @ 250 MHz
2.00
5,2,1
50 @ 250 MHz
1.74
5,2,1
53 @ 250 MHz
1.60
5,2,1
44 @ 150 MHz
1.40
5,2,1
36 @ 150 MHz
1.28
DCR max⁵
(Ohms)
0.020
0.035
0.035
0.045
0.060
0.060
0.060
0.070
0.095
0.110
0.095
0.120
Imax
(A)
2.0
1.9
1.8
1.6
1.4
1.4
1.4
1.3
1.1
1.0
1.1
0.9
1. When ordering, specify tolerance, termination and testing codes:
ST336RAD51NGLZ
Tolerance: F = 1%  G = 2%  J = 5%
Termination: L = RoHS compliant silver-palladium-platinum glass frit.
Special order:
S = Tin-lead (63/37) over silver-platinum-glass frit.
T = Tin-silver-copper (95.5/4/0.5) over silver-platinum-
glass frit.
Testing:
Z = COTS
H = Screening per Coilcraft CP-SA-10001
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286 impedance analyzer or equivalent with Coilcraft-provided correla-
tion pieces.
3. Q measured at the same frequency as inductance using an Agilent/HP
4291A with an Agilent/HP 16197 test fixture or equivalents.
4. SRF measured using an Agilent/HP 8753ES network analyzer or
equivalent and a Coilcraft SMD-D test fixture.
5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a
Coilcraft CCF858 test fixture.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Core material Ceramic
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Ambient temperature  –40°C to +125°C with Imax current, +125°C
to +140°C with derated current
Storage temperature  Component: –55°C to +140°C.
Packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +25 to +155 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging  2000 per 7″ reel  Plastic tape:  8 mm wide, 0.23 mm
thick, 4 mm pocket spacing, 1.65 mm pocket depth
© Coilcraft, Inc. 2012
Document ST197-1  Revised 11/06/12
®
1102 Silver Lake Road
Cary, IL 60013
Phone [phone]
Fax [phone]
Email [e-mail]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.