ST336PHA Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Power Inductor for Critical Applications

0805 POWER INDUCTORS
Power Inductor for Critical Applications ST336PHA
■ Shielded power inductors
■ Excellent current handling for a part this size; low DCR
Core material Ceramic/Ferrite
Terminations  Silver-palladium-platinum-glass frit. Other termina-
tions available at additional cost.
Weight  57.6 – 62.4 mg
Ambient temperature  –40°C to +65°C with Irms current, +65°C to
+105°C with derated current
Storage temperature  Component: –55°C to +105°C.
Packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +100 to +250 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging  1500/7″reel; 7500/13″ reel  Plastic tape:  8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 2.34 mm pocket depth

Part
  _number1
ST336PHA102KLZ
ST336PHA152KLZ
ST336PHA272KLZ
ST336PHA332KLZ
ST336PHA392KLZ
ST336PHA472KLZ
ST336PHA562KLZ
ST336PHA682KLZ
ST336PHA103KLZ
ST336PHA153KLZ
ST336PHA223KLZ
ST336PHA333KLZ
ST336PHA473KLZ
ST336PHA683KLZ
ST336PHA823KLZ
ST336PHA104KLZ
ST336PHA124KLZ
ST336PHA154KLZ
ST336PHA224KLZ
ST336PHA334KLZ
L^{2  } DCR^{4  }SRF⁵
±10% ^ Q min^3  max typ ^  Isat^{6  }Irms⁷
(µH) at 1 MHz (Ohms) (MHz) (A) (A)
1.0 21
1.5 21
2.7 21
3.3 21
3.9 21
0.14 340 0.90 1.6
0.18 265 0.85 1.3
0.35 190 0.60 0.88
0.50 180 0.55 0.70
0.74 165 0.50 0.61
4.7 21
5.6 21
6.8 21
10 21
15 21
0.85 155 0.43 0.59
0.91 143 0.38 0.57
1.37 118 0.32 0.46
1.51 66 0.27 0.43
2.04 34 0.22 0.34
22 25 2.48 22 0.18 0.33
33 25 3.00 17 0.16 0.28
47 25 3.85 15 0.15 0.26
68 28 4.42 12 0.12 0.24
82 30 6.00 12 0.11 0.21
100 32 6.96 9.0 0.10 0.19
120 32 7.51 7.7 0.10 0.18
150 32 8.33 5.0 0.08 0.18
220 32 13.71 5.0 0.07 0.14
330 32 20.53 3.5 0.06 0.11
1. When ordering, please specify termination and testing codes:
ST336PHA334KLZ
Termination: L = RoHS compliant silver-palladium-platinum-glass
frit. Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
2. Inductance measured at 100 kHz, 0.1 Vrms, using a Coilcraft SMD­‑A
fixture in Agilent/HP 4263B LCR meter.
3. Q measured on an Agilent/HP 4291 with an Agilent/HP 16193 test
fixture.
4. DCR measured on a micro-ohmmeter and a Coilcraft CCF840 test
fixture.
5. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
6. DC current at which the inductance drops 10% (typ) from its value
without current.
7. Current that causes a 40°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2011
®
Specifications subject to change without notice.
Please check our website for latest information. Document ST265-1  Revised 03/04/11
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com