|
SLC1480_16 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors | |||
|
Document 482-1
Shielded Power Inductors â SLC1480
⢠Requires a mere quarter square inch of board space
⢠Handles current as high as 130 A.
⢠Ideal for use in multi-phase VRM/VRD regulators
Designerâs Kit C467 contains 3 each of select values.
Core materialâFerrite
Terminationsâ RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weightâ 5.25 g
Ambient temperatureâ â40°C to +85°C with (40°C rise) Irms current.
Maximum part temperatureâ +125°C (ambient + temp rise). Derating.
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 500/13â³ reel;â Plastic tape:â 24 mm wide, 0.4 mm thick,
16 mm pocket spacing, 8.1 mm pocket depth
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
â Inductance2
 Part number1 ±20% (nH)
SLC1480-111ML_
110
SLC1480-131ML_
130
SLC1480-151ML_
150
SLC1480-171ML_
170
SLC1480-201ML_
200
SLC1480-231ML_
230
SLC1480-261ML_
260
SLC1480-301ML_
300
SLC1480-321ML_
320
SLC1480-441ML_
440
â DCR (mOhms)3 â SRF typ4
 â Isat (A)5
minâââ max
(MHz) 10% drop 20% drop 30% drop
0.15
0.21
130
110
128
130
0.15
0.21
110
97
110
112
0.15
0.21
108
88
95
97
0.15
0.21
75
80
87
90
0.15
0.21
68
65
72
76
0.15
0.21
59
57
64
67
0.15
0.21
50
50
57
61
0.15
0.21
46
42
49
52
0.15
0.21
42
38
44
48
0.15
0.21
35
28
32
35
â Irms (A)6
20°C riseâ 40°C rise
39
55
39
55
39
55
39
55
39
55
39
55
39
55
39
55
39
55
39
55
1. When ordering, please specify packaging code:
SLC1480-321MLD
Packaging: D = 13â³ machine-ready reel. EIA-481 embossed plastic
tape (500 per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284.
3. DCR is measured between the two points indicated below.
4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Points used for measuring DCR
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 482-1â Revised 09/14/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |