|
SLC1175 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors | |||
|
Document 838-1
Shielded Power Inductors â SLC1175
⢠Ideal for use in multi-phase VRM/VRD regulators and high
current/high frequency DC/DC converters.
⢠Offers inductance values unavailable in other high current series.
Core materialâFerrite
Core and winding lossâSee www.coilcraft.com/coreloss
Environmentâ RoHS compliant, halogen free
Terminationsâ RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weightâ 2.19 â 2.30 g
Ambient temperatureâ â40°C to +85°C with (40°C rise) Irms current.
Maximum part temperatureâ +125°C (ambient + temp rise). Derating.
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 150/7â³ reel, 700/13â³ reel;â Plastic tape:â 24 mm wide,
0.4 mm thick, 12 mm pocket spacing, 7.62 mm pocket depth
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
â Inductance2
 Part number1 ±20% (nH)
SLC1175-700ME_
70
SLC1175-121ME_ 120
SLC1175-151ME_ 150
SLC1175-171ME_ 170
SLC1175-201ME_ 200
SLC1175-231ME_ 230
SLC1175-271ME_ 270
SLC1175-301ME_ 300
â DCR (mOhms)3 â SRF typ4 â Â Isat (A)5
ââââââ ââIrms (A)6
minâââ max
(MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise
0.228 0.252
179
0.228 0.252
144
0.228 0.252
95
0.228 0.252
73
0.228 0.252
64
83
100
>100
80
84
88
64
70
76
54
60
63
48
53
55
25.5
35.5
25.5
35.5
25.5
35.5
25.5
35.5
25.5
35.5
0.228 0.252
61
41
46
49
0.228 0.252
52
32
37
40
0.228 0.252
48
27
31
34
25.5
35.5
25.5
35.5
25.5
35.5
1. When ordering, please specify packaging code:
SLC1175-301MEC
Packaging: C = 7â³ machine-ready reel. EIA-481 embossed plastic
tape (150 per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13â³ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (700 per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284.
3. DCR is measured between the two points indicated below.
4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Points used for measuring DCR
Document 838-1â Revised 09/15/15
|
▷ |