|
SER8050-501MEC_15 Datasheet, PDF (1/3 Pages) Coilcraft lnc. – Shielded Power Inductors | |||
|
Document 892 -1
Shielded Power Inductors â SER80xx
⢠Two different DCR / Isat versions to match the requirements
of a wide variety of applications
⢠Low DCR; excellent current handling
Core materialâFerrite
Core and winding lossâSee www.coilcraft.com/coreloss
Terminationsâ RoHS tin-silver over tin over nickel over phos bronze
(pins 1 and 2); Matte tin over nickel over phos bronze (pin 3). Other
terminations available at additional cost.
Weightâ 0.86 â 1.0 g
Ambient temperatureâ â40°C to +85°C with (40°C rise) Irms current.
Maximum part temperatureâ +125°C (ambient + temp rise). Derating.
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 250/7â³ reel, 1000/13â³ reel;â Plastic tape:â 16 mm wide,
0.4 mm thick, 12 mm pocket spacing, 5.2 mm pocket depth
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Low DCR version for high average current applications
âInductance2
Part number1 ±20% (µH)
âDCR (mOhm)3
typâââ max
â SRF typ4
(MHz)
SER8050-501ME_
0.50
SER8050-112ME_
1.1
SER8050-202ME_
2.0
SER8052-312ME_
3.1
2.22
2.50
234
3.19
3.50
109
5.35
5.88
74
6.44
7.20
63
SER8052-452ME_
4.5
8.64
9.50
52
SER8052-612ME_
6.1
8.64
9.50
45
SER8052-802ME_
8.0
13.03
14.33
43
SER8052-103ME_
10
13.03
14.33
40
10% drop
19.40
12.22
7.94
6.58
4.76
3.44
2.90
2.24
âIsat (A)5
20% drop 30% drop
22.02
13.86
9.22
7.56
22.68
14.50
9.78
8.00
5.74
6.14
4.22
4.58
3.58
3.86
2.80
3.10
â Irms (A)6
20°C riseâ 40°C rise
9.78
13.52
8.05
11.97
7.83
10.79
6.26
8.71
5.37
7.68
5.17
7.31
4.57
6.31
4.61
6.32
1. When ordering, please specify termination and packaging code:
SER8052-103MED
Termination: E = RoHS tin-silver over tin over nickel over phos bronze (pins 1 and 2); Matte tin over nickel over phos bronze (pin 3).
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7â³ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13â³ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked(1000 parts per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer and an Agilent/HP 16193A test fixture.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Document 892-1â Revised 08/21/12
|
▷ |