SER2009-301ML Datasheet, PDF (1/4 Pages) Coilcraft lnc. – SMT Power Inductors

Document 349-1
SMT Power Inductor - SER2000 Series
• Designed for high current power supply applications
• Flat wire windings provide exceptionally low DCR
• Isat ratings as high as 100 A
Designer’s Kit C374 contains 2 each of nine part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Ambient temperature –40°C to +85°C with Irms current, +85°C
to +125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C
/ 85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Only pure water or alcohol recommended
0.755 ±0.02
19,18 ±0,51
0.736 ±0.034
18,70 ±0,85
SER20xx-xxx
Coilcraft
XXXX
0.311 ±0.015
7,90 ±0,38
0.365 ±0.02
9,27 ±0,51
0.100
2,54
±0.003
±0,76
typ
Recommended Land Pattern
0.290
7,37
0.160
4,06
0.470
11,94
3
0.210
5,33
CL
0.015
0,38
1
2
0.185
4,70
0.150
3,81
0.260
6,60
0.150
3,81
Height
(See table)
0.130_*
3,30
*^{Width of flat area on winding}
0.004/0,102
0.125
3,18
0.515±0.015
13,08 ±0,37
0.100
2,54
1
2
3
Caution:
Terminal 3 is provided for mounting stability
only. This terminal is connected to the
winding of the inductor and must not be
connected to ground or any circuitry.
SER2009
SER2010
SER2011
SER2012
SER2013
SER2014
Maximum
height
0.34 / 8,64
0.37 / 9,40
0.42 / 10,67
0.47 / 11,94
0.51 / 12,95
0.55 / 13,97
Weight
6.65 – 6.89 g
7.46 – 7.90 g
8.63 – 9.08 g
9.92 – 10.3 g
10.8 – 11.4 g
11.7 – 12.4 g
Dimensions
are
in
inches
mm
Packaging
SER2009 200 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 4 mm pocket spacing, 9.25 pocket depth
SER2010 200 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 4 mm pocket spacing, 10.5 pocket depth
SER2011 170 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 4 mm pocket spacing, 11.6 pocket depth
SER2012 150 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 4 mm pocket spacing, 13.0 pocket depth
SER2013 150 per 13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 4 mm pocket spacing, 14.0 pocket depth
SER2014 125 per 13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 4 mm pocket spacing, 15.0 pocket depth
Specifications subject to change without notice.
Please check our website for latest information. Document 349-1 Revised 10/20/08
© Coilcraft, Inc. 2009