|
SD54_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors – SD54 Series | |||
|
Document 427-1
SMT Power Inductors â SD54 Series
⢠Rugged, cost-effective power inductors
⢠Excellent current handling; low DCR
⢠Values greater than 47 µH are 10% tolerance
Core materialâFerrite
Terminationsâ RoHS compliant tin-silver over tin over nickel over silver.
Weightâ 0.35 â 0.43 g
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +85°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 400/7â³ reel; 1500/13â³ reel;â Plastic tape:â 12 mm wide,
0.4 mm thick, 8 mm pocket spacing, 4.7 mm pocket depth
PCB washingâ Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
Part
number1
SD54-103ML_
SD54-123ML_
SD54-153ML_
SD54-183ML_
SD54-223ML_
SD54-273ML_
SD54-333ML_
SD54-393ML_
SD54-473ML_
SD54-563KL_
SD54-683KL_
SD54-823KL_
SD54-104KL_
SD54-124KL_
SD54-154KL_
SD54-184KL_
SD54-224KL_
Inductance2
(µH)
10 ±20%
12 ±20%
15 ±20%
18 ±20%
22 ±20%
27 ±20%
33 ±20%
39 ±20%
47 ±20%
56 ±10%
68 ±10%
82 ±10%
100 ±10%
120 ±10%
150 ±10%
180 ±10%
220 ±10%
DCR (mOhm)
nomââ max
71.5
80.2
94.0
103
119
78.6
88.2
103
113
130
134
147
150
165
195
214
222
244
251
276
335
368
379
416
503
553
579
636
654
719
874
961
996 1095
â SRF typ3
(MHz)
28
26
23
21
19
18
16
13
12
11
9.3
8.4
7.4
7.0
6.3
5.5
5.0
â Isat (A)4
â Irms (A)5
10% drop 20% drop 30% drop 20°C riseâ 40°C rise
2.0
2.3
1.8
2.0
1.5
1.8
1.4
1.6
1.3
1.5
2.4
1.7
2.3
2.2
1.6
2.2
1.9
1.5
2.1
1.8
1.4
2.0
1.6
1.3
1.8
1.2
1.4
1.4
1.1
1.2
1.3
1.0
1.1
1.2
0.92
1.0
1.1
0.83
0.96
1.0
1.2
1.7
1.2
1.6
1.0
1.4
0.97
1.3
0.92
1.3
0.76
0.88
0.69
0.80
0.62
0.72
0.56
0.66
0.51
0.60
0.95
0.80
1.1
0.85
0.74
1.1
0.77
0.64
0.88
0.71
0.58
0.80
0.64
0.57
0.77
0.46
0.53
0.43
0.50
0.57
0.49
0.67
0.54
0.47
0.66
1. When ordering, please specify packaging code:
SD54-224KLC
Packaging: C = 7â³ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13â³ machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked (1500 parts per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4284A impedance analyzer or equivalent.
3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft SMDÂâD test fixture.
4. DC current at which the inductance drops the specified amount from its value without current.
5. Current that causes the specified rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Document 427-1â Revised 12/30/14
|
▷ |