S3LP156L Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Surface Mount LC Filters

Document 124-1
Surface Mount LC Filters
Low Pass Filters
Part
number¹
S3LP156L_
S3LP306L_
S3LP606L_
S3LP157L_
S3LP307L_
S3LP507L_
S3LP707L_
S3LP807L_
S3LP907L_
S3LP108L_
S3LP128L_
S3LP158L_
S3LP188L_
S3LP218L_
-3 dB Cutoff
15 MHz
30 MHz
60 MHz
150 MHz
300 MHz
500 MHz
700 MHz
800 MHz
900 MHz
1.0 GHz
1.2 GHz
1.5 GHz
1.8 GHz
2.1 GHz
High Pass Filters
Part
number¹
S3HP156L_
S3HP306L_
S3HP606L_
S3HP157L_
S3HP307L_
S3HP507L_
S3HP807L_
-3 dB Cutoff
15 MHz
30 MHz
60 MHz
150 MHz
300 MHz
500 MHz
800 MHz
© Coilcraft, Inc. 2008
Irms (mA)²
200
300
300
400
400
500
500
500
500
500
500
500
500
500
Irms (mA)²
300
300
300
300
300
500
500
These space saving low and high pass filters are pre-
tuned, tight tolerance modules which serve a wide variety
of filtering requirements.
They feature 3rd order Butterworth alignment, less than
0.3 dB insertion loss and a compact, 1812-size construc-
tion ideally suited for auto insertion and reflow soldering.
• 3rd order Butterworth alignment
• 50 Ohm characteristic impedance
• Less than 0.3 dB insertion loss
Coilcraft Designer’s Kit D302 contains samples of all
low pass filters. To order, contact Coilcraft or visit
http://order.coilcraft.com.
Part marking
0.020
0,51
0.205
5,21
max
0.180
4,57
0.120
3,05
0.085
2,16
max
2nd digit
1st digit
(over P1) _{Multiplier (×10)} (over P3)
(over P2)
0.040
1,02
0.055
1,40
0.040
1,02
P1
0.045
P3 ^1,14
0.125
3,18
0.160
4,06
max
0.050
P2
1,27
0.070
Recommended
1,78
Land Pattern
Weight:
64.7 – 69.0 mg
Tape and reel: 600/7″ reel; 2200/13″ reel 12 mm tape width
See Tape and Reel Specifications section for packaging data.
See Color Coding section for part marking data.
1. When ordering, please specify termination and packaging codes:
S3HP156LC
Termination: L = RoHS compliant silver over copper or gold over nickel
over silver.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape
(600 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To
have a leader and trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape
(2200 parts per full reel).
2. Current that causes a 15°C rise from 25°C ambient.
3. Operating temperature range -40°C to +85°C.
4. Electrical specifications at 25°C.
Specifications subject to change without notice.
Please check our website for latest information. Document 124-1 Revised 11/16/06