|
RFS1113_14 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors – RFS1113 | |||
|
Document 1002-1
Shielded Power Inductors â RFS1113
⢠Low cost, high current power inductors
⢠6.8 µH to 2.7 mH inductance range
Core materialâFerrite
Terminationsâ Tin-silver (96.5/3.5) over tin over copper over steel.
Other terminations available at additional cost.
Weightâ 4.1 â 4.7 g
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +85°C.
Tray packaging: â40°C to +80°C
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 125 parts per tray
PCB washingâ Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf.
â Part number1
RFS1113-682ME
RFS1113-103ME
RFS1113-153ME
RFS1113-223ME
RFS1113-273ME
RFS1113-333ME
RFS1113-393ME
RFS1113-473ME
RFS1113-104ME
RFS1113-224ME
RFS1113-564ME
RFS1113-105ME
RFS1113-275ME
â Inductance2
±20% (µH)
6.8
10
15
22
27
33
39
47
100
220
560
1000
2700
DCR (Ohms)
typâââ max
0.014
0.017
0.020
0.023
0.032
0.016
0.020
0.023
0.026
0.036
0.045
0.058
0.081
0.184
0.281
0.052
0.064
0.089
0.200
0.295
0.709
1.80
3.76
0.744
1.89
3.95
â SRF typ3 Isat (A)4
âIrms (A)5
(MHz) 10% drop 20% drop 30% drop 20°C riseâ 40°C rise
45.0
6.6
8.0
9.1
5.65
7.80
30.2
5.4
6.6
7.4
5.20
7.20
19.8
4.0
5.0
5.8
4.80
6.60
11.8
3.5
4.2
4.8
4.40
6.10
9.6
3.0
3.6
4.2
3.60
5.05
8.8
2.8
3.5
4.0
3.20
4.40
8.4
2.4
3.1
3.6
2.75
3.75
7.9
2.2
2.9
3.3
2.30
3.20
4.0
1.5
1.9
2.2
1.55
2.10
2.8
1.0
1.3
1.5
1.25
1.65
1.8
0.68
0.86
0.98
0.73
1.00
1.3
0.51
0.63
0.73
0.46
0.60
0.72
0.33
0.40
0.45
0.30
0.40
1. When ordering, please specify termination code:
RFS1113-105ME
Termination: E = Tin-silver over tin over copper over steel.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent.
3. SRF measured using Agilent/HP 4191A or equilvalent.
4. DC current that causes the specified inductance drop from its value without current..
5. Current that causes the specified temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 1002-1â Revised 03/10/14
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |