|
RA6999_14 Datasheet, PDF (1/1 Pages) Coilcraft lnc. – Forward Mode Transformer | |||
|
Document 1198
Forward Mode Transformer ForMaximMAX17599
PWM Controller
⢠Forward mode transformer for the Maxim MAX17599 Active
Clamp Current-Mode PWM Controller
⢠18 â 36 V input; 12 V, 3.3 A output
⢠1500 Vrms, one minute isolation from primary to secondary
and gate windings
⢠Specified on reference design MAXREFDES48#
Core materialâFerrite
Terminationsâ RoHS tin-silver (96.5/3.5) over tin over nickel over phos
bronze.
Weightâ 10.5 g
Ambient temperatureâ â40°C to +85°C
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 175 per 13â³ reelâ Plastic tape: 44 mm wide, 0.4 mm thick,
28 mm pocket spacing, 11.9 mm pocket depth
PCB washingâ Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Part
â number1
RA6999-AL_
Inductance
â atâ0âA2
DCR max (mOhms)
minâ(µH)
priâââsecâââgate
70
20.5 29.5 36.4
Leakage
inductance
max (µH)
0.35
Turns ratio
pri : secââpri : gate
1â:â1.125 1â:â0.375
â Output3
12 V, 3.3 A
1. When ordering, please specify a packaging code:
RA6999-ALD
Packaging: D = 13â³ machine ready reel. EIA-481 embossed plastic tape (175 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead.
2. Inductance is measured at 250 kHz, 0.1 Vrms.
3. Output is for the secondary winding. Output of the gate winding is 12 V, 0.25 A
4. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
7
Gate
9
1
10
Pri
Sec
3
6
Dimensions are in
inches
mm
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 1198â Revised 08/19/14
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|