PTRF2000L Datasheet, PDF (1/1 Pages) Coilcraft lnc. – Surface Mount Tip and Ring Filters

Document 492
Surface Mount Tip and Ring Filters
These surface mount tip and ring filters provide sub-
stantial reduction of noise throughout an extended fre-
quency range. Their economical design makes them
attractive for a wide variety of applications.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
PTRF2000
1
4
8
5
PTRF4000
1
3
2
4
8
6
7
5
0.307 ±0.008
7,80 ±0,20
0.138 ±0.006
3,50 ±0,15
Notch indicates pin 1
0.012
0,305
0.098
2,50
0.317 ±0.012
8,05 ±0,30
0.007 / 0,18
4
0.217 ±0.008
5,50 ±0,20
1
* ^0.236
6,00
* 0.0395
1,00
5 _0.020
0,50
01.0,2570cen
8
* ^{Dimensions are typical prior to applying solder}
01.0,2570cen
Recommended
Land Pattern
5
4
0.030
0,76 ₈
0.200
5,08
1
0.060
1,52
Weight:
214 – 216 mg
Termination: Tin-silver-copper over tin over nickel over phos bronze
Tape and reel: 500/7″ reel; 2000/13″ reel 16 mm tape width
For packaging data see Tape and Reel Specifications section.
Part number¹
Lines
Minimum inductance:
(each winding @130 kHz)
Rated current:
DCR each winding:
Dielectric strength:
PTRF2000L_
1
35 µH
500 mA
0.075 ⏲ max
1500 Vrms
(1–8)
PTRF4000L_
2
35 µH
500 mA
0.135 ⏲ max
1500 Vrms
(1,2–7,8)
1. When ordering, please specify packaging code:
PTRF4000LC
Packaging: C = 7″ machine ready reel. EIA-481 embossed plastic
tape, 500 parts per full reel.
B = Less than full reel. In tape, but not machine ready. To
have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked, 2200 parts per
full reel.
2. Operating temperature range –40°C to +85°C.
3. Electrical specifications at 25°C.
Typical Response^**
-10
Differential Mode
0
10
20
Common _Mode
30
40
0.1
1
10
100
Frequency (MHz)
**^{Measured on Agilent/HP 8753D network analyzer.}
1000
Specifications subject to change without notice.
Please check our website for latest information.
Document 492 Revised 11/10/05
© Coilcraft, Inc. 2006