|
PL160_16 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Planar Transformers | |||
|
Document 1072-1
SMT Planar Transformers ForApplications
up to 160 Watts
Part
â number1
PL160-100L
PL160-101L
PL160-102L
PL160-103L
PL160-104L
⢠Rated for 160 Watts
⢠Designed to operate between 200 kHz and 700 kHz with a
nominal 48 V input.
⢠High efficiency; excellent DCR; very low leakage inductance;
1500 Vrms, one minute primary to secondary isolation.
⢠Provides 0.009Ⳡ(0.229 mm) clearance above the seating plane
⢠May be special ordered with an auxiliary winding
Core materialâFerrite
Terminationsâ Matte tin over nickel over brass
Weightâ 12.0 â 12.8 g
Ambient temperatureâ â40°C to +125°C
Storage temperatureâ Component: â40°C to +125°C.
Tray packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 36 per tray
PCB washingâ Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
Primary
turns
N1ââN2
44
45
55
56
66
Primary
â inductance2
â inLdeuacktaagnec e3 DCR m ax (mOhms )
min (µH)
max (µH) Primary (N1) Primary (N2) Secondary4
153
0.35
194
0.40
240
0.45
290
0.55
345
0.55
14.7
14.7
6.8
14.7
18.5
6.8
18.5
18.5
6.8
18.5
21.5
6.8
21.5
21.5
6.8
Volt-time
Height
â product typ5 max
(Vµsec)
(inâ/âmm)
150
0.352 / 8.94
168
0.352 / 8.94
187
0.360 / 9.14
206
0.375 / 9.53
224
0.375 / 9.53
1. To order a transformer with an optional auxiliary winding, add an âXâ and the turn count after the PL160, e.g. PL160X3-100LB.
Turn counts of 2, 3, 4, 5, 7 and 9 are available for the auxiliary winding. Transformers with auxiliary windings are not stocked.
2. Inductance measured on an Agilent/HP 4284 at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5 with pins 3 and 4 connected.
3. Leakage inductance measured at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5, with pins 3 and 4 connected, and with all
secondary pins shorted.
4. DCR for secondary is measured between pins 7 and 11.
5. Volt-time product is based on primary windings connected in series.
6. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
2
Pri N1
4
3
Pri N2
5
1
Aux (Opt)
6
11
1T
10
1T
9
1T
8
1T
7
US +1-847S-p6e3c9if-i6c4a0ti0onssasluebsj@ecctotiolccrahfat.ncgoemwithout notice.
UK +44-1P23le6a-s7e30c5h9e5ck soaulrews@ebcsoiitlecrfaofrt-leauterospt ein.fcoormmation.
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 1072-1â Revised 05/04/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |