|
PFL4517 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors | |||
|
Document 831-1
Shielded Power Inductors â PFL4517
⢠Low cost, low profile miniature power inductor
⢠Only 1.7 mm high; requires a mere 16 mm2 of board space
⢠Provides the current handling of much larger inductors; up
to 6.5 A.
Core materialâ Composite
Environmentalâ RoHS compliant, halogen free
Terminationsâ RoHS compliant, matte tin over nickel over silver-
platinum-glass frit. Other terminations available at additional cost.
Weightâ 89.8 mg
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 1000/7â³ reel; 5000/13â³ reel. Plastic tape: 12 mm wide,
0.21 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
PCB washingâ Only pure water or alcohol recommended
â Inductance2 â âDCR (mOhms)3
â Part number1 ±20% (µH)
typâââ max
PFL4517-681ME_
0.68
PFL4517-102ME_
1.0
PFL4517-222ME_
2.2
PFL4517-332ME_
3.3
PFL4517-472ME_
4.7
40
50
50
60
78
95
150
180
210
250
PFL4517-562ME_
5.6
PFL4517-822ME_
8.2
PFL4517-103ME_
10
240
290
390
460
620
700
â SRF typ4 â Isat (A)5
(MHz) 10% drop 20% drop
375
4.1
6.0
300
3.5
4.8
235
2.7
4.0
205
2.2
2.9
185
2.0
2.7
170
1.7
2.4
150
1.4
2.1
97
1.0
1.4
30% drop
6.5
5.3
4.2
3.2
3.0
2.6
2.3
1.5
â Irms (A)6
20°C riseâ 40°C rise
1.9
2.7
1.7
2.3
1.4
1.8
0.85
1.2
0.80
1.1
0.70
1.0
0.50
0.69
0.63
0.83
1. When ordering, please specify packaging code:
PFL4517-103MEC
Packaging: C = 7â³ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13â³ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (5000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0Adc.
3. DCR measured using a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
5. DC current that causes the specified inductance drop from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 831-1â Revised 12/13/11
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
|
▷ |