PFL2015_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 876-1
Shielded Power Inductors – PFL2015
• Low cost, low profile 0805 size power inductor
• Can handle current of much larger inductors; up to 1900 mA
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant matte tin over nickel over silver-
platinum-glass frit. Other terminations available at additional cost.
Weight  14.1 mg
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7″ reel; 7500/13″ reel. Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.63 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
^  Inductance^{2  }    DCR ^(mOhms)3
  _{Part number}1 _{±20% (µH)}
typ
max
PFL2015-561ME_
0.56
PFL2015-681ME_
0.68
PFL2015-102ME_
1.0
PFL2015-222ME_
2.2
PFL2015-332ME_
3.3
60
70
62
75
110
130
175
210
255
280
PFL2015-472ME_
4.7
PFL2015-682ME_
6.8
275
340
340
400
  _{SRF typ}4 ^  Isat (mA)⁵
(MHz) 10% drop 20% drop
600
1300
1600
460
1200
1600
450
900
1200
100
640
840
60
480
650
50
450
620
40
380
520
      Irms (mA)⁶
30% drop 20°C rise 40°C rise
1900
1800
1400
1050
720
1300
1100
940
770
700
1800
1500
1200
1000
900
700
600
770
600
520
680
1. When ordering, please specify termination and packaging codes:
PFL2015-682MEC
Termination: E = RoHS compliant matte tin over nickel over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
2. Inductance tested at 7.9 MHz, 0.1 Vrms using a Coilcraft SMD-A test fixture with an Agilent/HP 4286 impedance analyzer and Coilcraft-provided cor-
relation pieces.
3. DCR measured using a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 876-1  Revised 09/13/15