PFL2010_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 775 -1
Shielded Power Inductors – PFL2010
• Only 1 mm high; requires a mere 3.2 mm² of board space
• Provides the current handling of much larger inductors; up
to 1800 mA
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant matte tin over nickel over silver-plati-
num-glass frit. Other terminations available at additional cost.
Weight  9.5 – 9.8 mg
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7″ reel; 7500/13″ reel. Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.07 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.


 
Inductance^{2   DCR}
(mO hms)³   _{SRF typ}4 ^ 
Isat
   
(mA)⁵
  _{Part number}1 _{±20% (µH)}
typ    max
(MHz) 10% drop 20% drop 30% drop
PFL2010-471ME_
0.47
PFL2010-681ME_
0.68
PFL2010-102ME_
1.0
PFL2010-222ME_
2.2
PFL2010-472ME_
4.7
60
69
87
95
189
208
423
465
618
680
630
1200
560
950
347
850
129
510
66
330
1600
1300
1100
680
490
1800
1500
1200
790
570
Irms (mA)⁶
20°C rise  40°C rise
1500
1400
640
480
420
1900
1600
860
660
560
1. When ordering, please specify termination and packaging codes:
PFL2010-472MEC
Termination: E = RoHS compliant matte tin over nickel over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
2. Inductance tested at 7.9 MHz, 0.1 Vrms using a Coilcraft SMD-F test fixture with an Agilent/HP 4286 impedance analyzer and Coilcraft-provided correla-
tion pieces.
3. DCR measured using a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 775-1  Revised 09/13/15