PFL1610_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 753 -1
Shielded Power Inductors – PFL1610
• Low cost, low profile, 0603 size power inductor
• Current handling of much larger inductors; up to 2350 mA.
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant matte tin over nickel over silver-plati-
num-glass frit. Other terminations available at additional cost.
Core material  Composite
Core and winding loss  See www.coilcraft.com/coreloss
Weight  5.4 – 5.7 mg
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000 per 7″ reel  Paper tape:  8 mm wide, 1.0 mm thick,
4 mm pocket spacing
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.


  _Inductance2  _{  DC} R (m Ohms)³
  _{Part number}1 _{±20% (µH) typ}
max
PFL1610-331ME_
0.33
PFL1610-471ME_
0.47
PFL1610-561ME_
0.56
PFL1610-681ME_
0.68
PFL1610-102ME_
1.0
85
98
183
205
143
160
203
223
331
365
PFL1610-222ME_
2.2
PFL1610-472ME_
4.7
1120
1560
1230
1720
   
  _{SRF typ}4 ^  Isat (mA)⁵
      Irms (mA)⁶
(MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise
644
1140
1860
2350
540
1000
1700
1820
475
800
1400
1600
423
800
1500
1630
351
650
1000
1260
1100
770
700
720
570
1500
1000
900
970
750
105
330
555
660
85
290
480
560
280
380
230
310
1. When ordering, please specify packaging codes:
PFL1610-472MEW
Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape
(2000 parts per full reel).
U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead.
2. Inductance tested at 7.9 MHz, 0.1 Vrms using a Coilcraft SMD-F test fixture with an Agilent/HP 4286 impedance analyzer and Coilcraft-provided cor-
relation pieces.
3. DCR measured using a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 753-1  Revised 09/13/15