|
PFL1609_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors | |||
|
Document 875 -1
Shielded Power Inductors â PFL1609
⢠Low cost, low profile 0603 size power inductor
⢠Less than 1 mm high; requires less than 2 mm2 of board space
⢠Lower DCR than other parts this size
â
Inductance2 â DCR
(mO hms)3 â SRF typ4 â
Isat
âââ
(mA)5
â Part number1 ±20% (µH) typâââ max
(MHz) 10% drop 20% drop 30% drop
PFL1609-471ME_
0.47
83
100
650
PFL1609-561ME_
0.56
110
130
600
PFL1609-681ME_
0.68
145
170
520
PFL1609-102ME_
1.0
200
230
445
PFL1609-222ME_
2.2
410
470
130
PFL1609-472ME_
4.7
620
700
60
760
990
1200
710
920
1100
610
780
900
480
690
760
300
390
470
240
300
370
â Irms (mA)6
20°C riseâ 40°C rise
1000
1100
1100
650
480
380
1300
1400
1400
850
630
500
1. When ordering, please specify packaging codes:
PFL1609-472MEW
Packaging: W = 7â³ machine-ready reel. EIA-481 punched paper
tape
(2000 parts per full reel).
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter W instead.
2. Inductance tested at 7.9 MHz, 0.1 Vrms using a Coilcraft SMD-F test
fixture with an Agilent/HP 4286A impedance analyzer and Coilcraft-
provided correlation pieces.
3. DCR measured using a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Designerâs Kit C433 contains 20 of each PFL1609 and PFL2010 value
Core materialâ Composite
Core and winding lossâSee www.coilcraft.com/coreloss
Environmentalâ RoHS compliant, halogen free
Terminationsâ RoHS compliant matte tin over nickel over silver-
platinum-glass frit. Other terminations available at additional cost.
Weightâ 7.9 â 8.3 mg
Ambient temperatureâ â40°C to +85°C with (40°C rise) Irms current.
Maximum part temperatureâ +125°C (ambient + temp rise). Derating.
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 2000 per 7â³ reelâ Paper tape:â 8 mm wide, 1.0 mm thick,
2 mm pocket spacing
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Document 875-1â Revised 09/13/15
|
▷ |