|
PFL1005_15 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors | |||
|
Document 739 -1
Shielded Power Inductors â PFL1005
The industryâs first true 0402 size shielded power inductor.
Core materialâComposite
Core and winding lossâSee www.coilcraft.com/coreloss
Weightâ 1.3 â 1.8 mg
Environmentalâ RoHS compliant, halogen free
Terminationsâ RoHS compliant matte tin over nickel over silver-
palladium-glass frit.
Ambient temperatureâ â40°C to +85°C with (40°C rise) Irms current.
Maximum part temperatureâ +125°C (ambient + temp rise). Derating.
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 2000 per 7â³ reelâ Paper tape:â 8 mm wide, 0.68 mm thick,
2 mm pocket spacing
PCB washingâ Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
â Inductance2
â Part number1 ±20% (nH)
PFL1005-18NMR_
18
PFL1005-36NMR_
36
PFL1005-60NMR_
60
PFL1005-101MR_
100
PFL1005-181MR_
180
PFL1005-271MR_
PFL1005-391MR_
PFL1005-561MR_
PFL1005-721MR_
PFL1005-102MR_
270
390
560
720
1000
âDCR (Ohms)3 â SRF typ4 â Isat (mA)5
typâââ max
(MHz)
10% drop 20% drop 30% drop
0.032
0.034
0.042
0.059
0.19
0.042
0.043
0.050
0.075
0.21
3400
2500
2100
2200
1250
2000
1500
1300
1000
700
2500
2400
1900
1500
880
2600
2800
2100
1900
1100
0.22 0.24
920
0.45 0.51
770
0.48 0.54
620
0.62 0.68
560
0.97 1.08
460
450
650
740
380
510
550
300
440
490
280
400
450
270
350
380
â Irms (mA)6
20°C riseâ 40°C rise
1400
1400
1200
1100
900
2000
2000
1600
1500
1200
700
910
450
570
410
530
370
470
310
400
1. When ordering, please specify packaging codes:
PFL1005-102MRW
Packaging: W = 7â³ machine-ready reel. EIA-481 punched paper tape
(2000 parts per full reel).
U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead.
2. Inductance tested at 7.9 MHz, 0.1 Vrms using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286
impedance analyzer.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Document 739-1â Revised 09/13/15
|
▷ |