PA6605_16 Datasheet, PDF (1/1 Pages) Coilcraft lnc. – Planar Transformer

Document 1213
Planar Transformer ForTILM5122Synchronous
Flyback Controller
• Designed forTexas Instruments LM5122 Synchronous Flyback
Controller with Multiple Phase Capability
• 96% efficiency
• 9.0 – 60 V input; up to12 V, 5 A output
• 1500 Vrms, one minute isolation (hipot) from primary to
secondary; 500 Vrms windings to core
Core material Ferrite
Terminations  Matte tin over nickel over brass.
Weight  23.5 g
Ambient temperature  –40°C to +85°C
Storage temperature  Component: –40°C to +85°C.
Tray packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  25 parts per tray
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.


Part number
PA6605-AL
Inductance
  _{at 0 A}1
±10% (µH)
10
Inductance
  _at Ipk2
  _{DCR max}3
min (µH)
(mOhms)
9.0
4.7
Leakage
  _inductance4
max (µH)
0.13
1. Inductance is measured at 250 kHz, 0.1 Vrms.
2. Ipk is the current drawn at minimum input voltage
3. DCR is for each winding
4. Leakage inductance is for the primary, measured at 250 kHz, 0.1 Vrms with secondary winding shorted.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
1
1.050
26,67
max
2
Dot indicates pin 1
4
3
0.748 ±0.012
19,0 ±0,30
13.108,01max
1
4
0.625
15,875
Recommended
Land Pattern
2
3
1.00
25,40
1
Pri
2
0.110
2,80
∅
  _Ipk2
(Adc)
12.5
4
Sec
3
1:1
Output
12 V, 5 A
0.009
0,229
0.095
2,41
0.535
13,6
max
0.006 /0,15
Dimensions are in
inches
mm
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 1213  Revised 03/03/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.