P7LP-304L Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Low Pass LC Filter Modules

Document 118-1
Low Pass LC Filter Modules
Coilcraft’s family of low pass LC filters are available in 3rd
order Butterworth and 7th order elliptical alignments. These
space saving SIP filters offer all the benefits of an LC
design: low insertion loss, high power handling and con-
trolled group delay.
Built using Coilcraft’s tight tolerance surface mount induc-
tors, these filters can be readily customized to meet your
specific requirements.
• 3rd and 7th order alignments
• 50 Ohm characteristic impedance (75 Ohm versions
also available)
• Less than 0.3 dB insertion loss
Coilcraft Designer’s Kit D301 contains samples of the
filters shown in bold. To order, contact Coilcraft or visit
http://order.coilcraft.com.
7 Pole Filters
Part -3 dB cutoff¹
number
(MHz)
P7LP-304L
0.30
P7LP-604L
0.60
P7LP-155L
1.5
P7LP-305L
3.0
P7LP-605L
6.0
P7LP-156L
15
P7LP-306L
30
P7LP-606L
60
P7LP-157L
150
P7LP-307L 300
P7LP-507L
500
Irms²
(mA)
100
200
200
250
250
300
400
500
600
600
600
3 Pole Filters
Part
number
P3LP-304L
P3LP-604L
P3LP-155L
P3LP-305L
P3LP-605L
P3LP-156L
P3LP-306L
P3LP-606L
P3LP-157L
P3LP-307L
P3LP-507L
-3 dB cutoff¹
(MHz)
0.30
0.60
1.5
3.0
6.0
15
30
60
150
300
500
Irms²
(mA)
100
200
200
200
300
400
500
500
900
900
500
1. Tested on Network Analyzers Agilent/HP 8753D
Agilent/HP 3577B.
2. Current that causes a 15°C temperature rise from 25°C ambient.
3. Ambient temperature range: –40°C to +85°C
4. Storage temperature range: Component: –40°C to +85°C
Packaging: –40°C to +80°C
5. Electrical specifications at 25°C.
6. Parts in bold type are included in a Coilcraft Designer’s Kit.
Weight:
P3LP: 0.33 – 0.68g; P7LP: 0.86 g
Terminations: Matte-tin over nickel over phos bronze
Packaging: 30 per tray
7 Pole Filters
0.950
24,13
max
0.185
4,70
max
3 Pole Filters
08.3,8590 _max*
0.185
4,70
max***
0.450
11,43
max
P1
0.180
4,57
min
0.01 × 0.02
0,25 × 0,51
0.100
2,54
typ
Recommended
PC
board
hole
size
=
0.027
0,69
C2
C4
C6
Input
P1
C1
L1
C3
P2
L2
C5
P4
L3
C7
P6
Output
P9
P8
0.500
12,70 ^max**
P1
0.180
4,57
min
Input
P1
Models -304 and -604
* ^0.406/11,68
** ^0.510/12,95
*** ^0.220/5,59
0.100
2,54
typ
0.01 × 0.02
0,25 × 0,51
Recommended
PC
board
hole
size
=
0.027
0,69
L1
P2
L2
C1
Output
P3
Specifications subject to change without notice.
Please check our website for latest information.
Document 118-1 Revised 10/30/08
© Coilcraft, Inc. 2009