P3717-AL Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Combination Line Filter Choke

Document 144-1
Combination
Line
Filter
Choke
Common and
Differential Mode
This series of chokes is intended for use in AC line filters
for switching power supplies. They combine common
and differential mode filtering in a single component.
By using these parts, designers can eliminate two extra
filter chokes compared to a standard common mode
choke. The unique combination of special windings and
materials provides much better filtering performance
than either a common mode choke or a single winding
inductor alone.
The differential filtering frequency response is designed
to provide filtering at higher frequencies while still allow-
ing the AC line power to pass through without loss. This
characteristic is demonstrated in the Differential Mode
Attenuation curves.
Part
number
P3717-AL
Q4007-AL
Q4018-AL
Common
mode L
typ (mH)
25.0
4.5
1.5
Differential DCR
Current
mode L max Isolation rating
typ (µH) (Ohms) (Vrms) (A)
1000
150
35
0.30 1500
3
0.06 1500
5
0.02 1500
10
1. Operating temperature range –40° to +85°C.
2. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Core material Ferrite
Terminations RoHS compliant tin-silver over tin over copper.
Weight 100 – 113 g
Ambient temperature –40°C to +85°C
Storage temperature Component: –55°C to +85°C.
Packaging: –40°C to +80°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Failures in Time (FIT) 38 failures in one billion hours
Packaging 30 per tray (after 5/09); 16 per tray (prior to 6/09)
PCB washing Only pure water or alcohol recommended
1.75
44,5
max
1.30
33,0
max
0.900
22,86
0.150 ±0.03
3,81 ±0,76
5
8
1.00
25,4
4
4
1.00
25,40
5
1
1
0.09
2,28
8
1.55
39,4
max
8
1
0.053 ±0.002
1,35 ±0,05
1
4
8
5
0.900
22,86
Recommended
PC Board Layout
Specifications subject to change without notice.
Please check our website for latest information.
Document 144-1 Revised 05/20/09
© Coilcraft, Inc. 2009