NA5880_15 Datasheet, PDF (1/1 Pages) Coilcraft lnc. – Coupled Inductor

Document 1259
Coupled Inductor – NA5880-AE
• Developed for use with Fairchild Semiconductor FAN8831
Sinusoidal Piezoelectric Actuator Driver
• 1 : 4 turns ratio; Output voltages up to 300 V
Core material Ferrite
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant matte tin over silver-palladium-
platinum-glass frit.
Weight  64 mg
Ambient temperature  –40°C to +85°C
Maximum part temperature  +165°C (ambient + temp rise).
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Winding to winding isolation (Hipot)  300 V
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  1000/7″ reel; 3500/13″ reel  Plastic tape:  12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 1.32 mm pocket depth
Recommended pick and place nozzle  OD: 4 mm; ID: ≤ 2 mm
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
^{DCR max}
Part
  _Inductance2 _Turns
(Ohms)
  _number1 _{±20% (µH) ratio L1   L2}
NA5880-AE_
3.3
1 : 4 0.306 2.30
SRF
  _typ3   _Isat4
(MHz) (A)
12 1.3
1. When ordering, please specify packaging code:
NA5880-AEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (3500 parts per
full reel).
2. Inductance is for the primary (L1), measured at 100 kHz, 0.1 Vrms,
0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
3. SRF measured using an Agilent/HP 4191A or equivalent.
4. DC current applied to L1, at which the inductance drops 10% from its
value without current.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Dot indicates pin 1
1
4
1
4
0.155 ±0.003
3,94 ±0,08
L1
L2
2 332X 3
2
3
Inductance Internal
Value
code
0.155 ±0.003
3,94 ±0,08
0.0433 ±0.004
1,10 ±0,10
Recommended
Land Pattern
1
0.103 0.049
2,61 1,25
0.031
0,78
4 _45°
typ
0.174
4,40
0.060
1,52
Dimensions are in
inches
mm
2
3
0.049
1,25
0.103
2,61
0.174
4,40
Document 1259  Revised 05/04/15