MSS6132 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 641-1
Shielded Power Inductors – MSS6132
• 6.1 × 6.1 mm footprint; 3.2 mm high shielded inductors
• Low DCR and excellent current handling
Designer’s Kit C364 contains 3 of each value
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations  RoHS compliant matte tin over nickel over phos
bronze (current production) or gold over nickel over phos bronze (prior
production). Other terminations available at additional cost.
Weight  0.33 – 0.38 g
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  500/7″ reel, 1500/13″ reel; Plastic tape:  16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.1 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.

DCR SRF
  _{Isat (A)}4 _{    Irms (A)}5
^  Inductance² max ^  typ³ 10% 20% 30% 20°C 40°C
  _{Part number}1 _{±20% (µH) (Ohms) (MHz) drop drop drop rise rise}
MSS6132-472ML_ 4.7
MSS6132-562ML_ 5.6
MSS6132-682ML_ 6.8
MSS6132-822ML_ 8.2
MSS6132-103ML_ 10
0.043
0.048
0.052
0.055
0.070
65.0 2.18 2.60 2.84
60.0 2.10 2.50 2.74
47.0 1.80 2.12 2.30
45.0 1.78 2.06 2.22
39.0 1.36 1.64 1.84
2.30 3.10
2.20 2.95
2.10 2.80
2.00 2.65
1.90 2.50
MSS6132-123ML_ 12
MSS6132-153ML_ 15
MSS6132-183ML_ 18
MSS6132-223ML_ 22
MSS6132-273ML_ 27
0.079
0.106
0.118
0.158
0.180
33.0 1.30 1.54 1.70
27.0 1.16 1.42 1.56
24.0 1.04 1.22 1.36
21.0 0.97 1.12 1.22
19.0 0.91 1.08 1.18
1.75 2.35
1.65 2.20
1.55 2.05
1.45 1.90
1.30 1.75
MSS6132-333ML_ 33
MSS6132-393ML_ 39
MSS6132-473ML_ 47
MSS6132-563ML_ 56
MSS6132-683ML_ 68
0.250
0.275
0.300
0.380
0.410
18.0 0.81 0.96 1.10
17.0 0.79 0.92 0.99
16.0 0.72 0.86 0.93
14.0 0.61 0.72 0.79
12.0 0.55 0.63 0.69
1.20 1.60
1.10 1.45
0.95 1.30
0.85 1.15
0.73 1.00
MSS6132-823ML_ 82
MSS6132-104ML_ 100
0.510 10.0 0.53 0.62 0.67 0.60 0.85
0.660 9.0 0.45 0.54 0.59 0.50 0.69
1. Please specify termination and packaging codes:
MSS6132-823MLC
Termination: L = RoHS compliant matte tin over
nickel over phos bronze (current
production) or gold over nickel over
phos bronze (prior production)
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) over gold over nickel
over phos bronze or
S = non-RoHS tin-lead (63/37) over
gold over nickel over phos bronze.
Packaging: C= 7″ machine-ready reel  EIA-481
embossed plastic tape (500 per
full reel).
B= Less than full reel  In tape, but
not machine-ready. To have a lead-
er and trailer added ($25 charge),
use code letter C instead.
D= 13″ machine-ready reel  EIA-481
embossed plastic tape. Factory
order only, not stocked (1500 per
reel per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using
an Agilent/HP 4263B LCR meter or equivalent.
3. SRF measured using Agilent/HP 4191A or equilvalent.
4. DC current at which the inductance drops the specified
amount from its value without current.
5. DC current at 25°C that causes the specified inductance
drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise
from 25°C ambient. This information is for reference
only and does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Document 641-1  Revised 09/02/15