MSS6132-472ML Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors

Document 641-1
SMT Power Inductors – MSS6132
• 6.1 × 6.1 mm footprint; 3.2 mm high shielded inductors
• Low DCR and excellent current handling
Designer’s Kit C364 contains 3 of each value
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weight 0.33 – 0.38 g
Ambient temperature –40°C to +85°C with Irms current,
+85°C to +125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel, 1500/13″ reel; Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 3.1 mm pocket depth
PCB washing Only pure water or alcohol recommended
DCR SRF
Isat (A)⁴
Inductance² max typ³ 10% 20% 30%
Part number¹ ±20% (µH) (Ohms) (MHz) drop drop drop
MSS6132-472ML_ 4.7
MSS6132-562ML_ 5.6
MSS6132-682ML_ 6.8
MSS6132-822ML_ 8.2
MSS6132-103ML_ 10
0.056
0.060
0.065
0.070
0.085
65.0 2.18 2.60 2.84
60.0 2.10 2.50 2.74
47.0 1.80 2.12 2.30
45.0 1.78 2.06 2.22
39.0 1.36 1.64 1.84
MSS6132-123ML_ 12
MSS6132-153ML_ 15
MSS6132-183ML_ 18
MSS6132-223ML_ 22
MSS6132-273ML_ 27
0.110
0.135
0.160
0.190
0.235
33.0 1.30 1.54 1.70
27.0 1.16 1.42 1.56
24.0 1.04 1.22 1.36
21.0 0.97 1.12 1.22
19.0 0.91 1.08 1.18
MSS6132-333ML_ 33
MSS6132-393ML_ 39
MSS6132-473ML_ 47
MSS6132-563ML_ 56
MSS6132-683ML_ 68
0.310
0.345
0.380
0.430
0.580
18.0 0.81 0.96 1.10
17.0 0.79 0.92 0.99
16.0 0.72 0.86 0.93
14.0 0.61 0.72 0.79
12.0 0.55 0.63 0.69
MSS6132-823ML_ 82
MSS6132-104ML_ 100
0.640 10.0 0.53 0.62 0.67
0.820 9.0 0.45 0.54 0.59
Irms (A)⁵
20°C 40°C
rise rise
2.30 3.10
2.20 2.95
2.10 2.80
2.00 2.65
1.90 2.50
1.75 2.35
1.65 2.20
1.55 2.05
1.45 1.90
1.30 1.75
1.20 1.60
1.10 1.45
0.95 1.30
0.85 1.15
0.73 1.00
0.60 0.85
0.50 0.69
1. Please specify termination and packaging codes:
MSS6132-823MLC
Termination: L = RoHS compliant gold over nickel over
phos bronze
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel EIA-481
embossed plastic tape (500 per
full reel).
B= Less than full reel In tape, but not
machine-ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D= 13″ machine-ready reel EIA-481
embossed plastic tape. Factory order
only, not stocked (1500 per reel per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4263B LCR meter or equivalent.
3. SRF measured using Agilent/HP 4191A or equilvalent.
4. DC current at which the inductance drops the specified
amount from its value without current.
5. Current that causes the specified temperature rise from
25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 641-1 Revised 10/20/08