MSS1583 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 1111-1
Shielded Power Inductors – MSS1583
• 14.8 × 14.8 mm footprint; 8.6 mm high shielded inductors
• 16 inductance values from 10 µH to 1 mH
• Low DCR and excellent current handling
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environment  RoHS compliant, halogen free
Terminations  RoHS compliant matte tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight:  3.7 – 4.4 g
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  300/13″ reel;  Plastic tape:  32 mm wide, 0.5 mm thick,
24 mm pocket spacing, 8.6 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
^  Inductance²
  _{Part number}1
(µH)
MSS1583-103ME_
MSS1583-123ME_
MSS1583-153ME_
MSS1583-183ME_
MSS1583-223ME_
10 ±20%
12 ±20%
15 ±20%
18 ±20%
22 ±20%
MSS1583-333ME_
MSS1583-473ME_
MSS1583-683ME_
MSS1583-104KE_
MSS1583-154KE_
33 ±20%
47 ±20%
68 ±20%
100 ±10%
150 ±10%
MSS1583-224KE_
MSS1583-334KE_
MSS1583-474KE_
MSS1583-684KE_
MSS1583-824KE_
220 ±10%
330 ±10%
470 ±10%
680 ±10%
820 ±10%
MSS1583-105KE_ 1000 ±10%
  _{DCR (Ohms)}3
typ    max
0.012
0.014
0.018
0.020
0.023
0.014
0.017
0.021
0.023
0.026
0.033
0.048
0.061
0.090
0.138
0.038
0.055
0.070
0.103
0.159
0.205
0.300
0.386
0.570
0.640
0.235
0.345
0.445
0.655
0.736
0.860 0.990
  _{SRF typ}4 Isat (A)⁵
Irms (A)⁶
(MHz)
10% drop 20% drop 30% drop 20°C rise  40°C rise
17.0
12.0
13.6
14.7
5.0
7.4
14.5
11.7
13.3
14.2
4.4
6.3
13.5
10.1
11.5
12.4
4.3
6.1
12.0
9.2
10.5
11.2
3.9
5.5
10.5
8.2
9.1
10.4
3.7
5.3
8.5
7.0
7.9
8.6
3.4
4.8
7.3
5.9
6.7
7.3
2.7
3.7
6.0
4.7
5.5
6.0
2.5
3.4
4.8
3.9
4.4
4.8
2.0
2.8
3.7
3.1
3.6
3.9
1.55
2.20
3.0
2.6
3.0
3.3
1.30
1.80
2.7
2.0
2.3
2.5
1.00
1.45
2.2
1.8
2.0
2.2
0.96
1.35
1.8
1.4
1.6
1.8
0.78
1.10
1.6
1.3
1.5
1.6
0.74
1.0
1.5
1.1
1.3
1.4
0.63
0.86
1. Specify termination and packaging codes:
MSS1583-105KED
Termination: E = RoHS compliant matte tin over nickel over phos
bronze.
Special order:
Q = RoHS tin-silver-copper (95.5/4/0.5) or
P = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (300 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/
HP 4263B LCR meter or equivalent.
3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test
fixture.
4. SRF measured using Agilent/HP 4191A or equivalent.
5. DC current at 25°C that causes the specified drop in inductance from
its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1111-1  Revised 07/10/15