|
MSS1278-822MLB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors -– MSS1278 | |||
|
Document 322-1
SMT Power Inductors â MSS1278
⢠12.3 à 12.3 mm footprint; 8 mm high shielded inductors
⢠Low DCR and excellent current handling
Designerâs Kit C380 contains 3 each of all values.
Core materialâFerrite
Core and winding lossâ See www.coilcraft.com/coreloss
Terminationsâ RoHS compliant matte tin over nickel over phos
bronze. Other terminations available at additional cost.
Weight:â 3.8 â 4.6 g
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 500/13â³ reel;â Plastic tape:â 24 mm wide, 0.5 mm thick,
16 mm pocket spacing, 8.7 mm pocket depth
PCB washingâ Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf.
â Part number1
â Inductanâceâ2ââââââââ(mâDOChRm3s )
(µH)
typ max
MSS1278-142ML_ âââ1.4 ±20% 8.8 9.8
MSS1278-472ML_ âââ4.7 ±20% 13.9 15.5
MSS1278-562ML_ âââ5.6 ±20% 15.7 17.5
MSS1278-682ML_ âââ6.8 ±20% 19.1 21.3
MSS1278-822ML_ âââ8.2 ±20% 20.3 22.6
MSS1278-103ML_ ââ10 ±20%
MSS1278-123ML_ ââ12 ±20%
MSS1278-153ML_ ââ15 ±20%
MSS1278-183ML_ ââ18 ±20%
MSS1278-223ML_ ââ22 ±20%
21.8 24.3
23.2 25.8
27.9 31.0
30.8 34.3
35.5 39.5
MSS1278-273ML_ ââ27 ±20%
MSS1278-333ML_ ââ33 ±20%
MSS1278-393ML_ ââ39 ±20%
MSS1278-473ML_ ââ47 ±20%
MSS1278-563ML_ ââ56 ±20%
45.0 50.0
61.9 68.8
69.1 76.8
72.3 80.4
80.2 89.2
MSS1278-683ML_ ââ68 ±20%
MSS1278-823ML_ ââ82 ±20%
MSS1278-104ML_ â100 ±20%
MSS1278-124KL_ â120 ±10%
MSS1278-154KL_ â150 ±10%
91.3
125.9
135.1
182.3
216.5
101.5
139.9
150.2
202.6
240.6
MSS1278-184KL_ â180 ±10%
MSS1278-224KL_ â220 ±10%
MSS1278-274KL_ â270 ±10%
MSS1278-334KL_ â330 ±10%
MSS1278-394KL_ â390 ±10%
229.0
323.6
415.6
487.3
533.6
254.5
359.6
461.8
541.5
592.9
MSS1278-474KL_ â470 ±10%
MSS1278-564KL_ â560 ±10%
MSS1278-684KL_ â680 ±10%
MSS1278-824KL_ â820 ±10%
MSS1278-105KL_ 1000 ±10%
707.5 786.2
777.4 863.8
1045 1162
1166 1296
1334 1483
SRF
â Isat (A)5 âââIrms (A)6
â typ4 10% 20% 30% 20°C 40°C
(MHz) drop drop drop rise rise
80.0 25.2 28.6 30.6
30.0 13.7 15.2 15.9
24.0 12.2 13.7 14.6
21.0 11.3 12.7 13.7
20.0 10.1 11.5 12.3
7.00 10.00
4.30 6.20
4.30 6.20
4.20 6.00
4.10 5.90
17.0 9.36 10.6 11.2 4.00 5.70
15.0 8.84 10.0 10.7 3.70 5.20
13.0 7.30 8.36 9.00 3.50 4.90
12.0 6.10 7.10 7.74 3.00 4.50
11.0 6.04 6.78 7.24 2.90 4.00
10.0 5.80 6.56 7.02 2.60 3.60
9.5 5.22 5.90 6.30 2.30 3.10
8.5 4.68 5.42 5.80 2.10 3.00
7.5 4.40 5.02 5.32 2.00 2.90
7.0 4.02 4.60 4.90 1.90 2.70
6.5 3.40 3.86 4.26 1.80 2.60
5.0 3.12 3.58 3.80 1.60 2.30
4.5 2.88 3.28 3.52 1.50 2.20
4.3 2.62 3.00 3.24 1.40 1.90
4.1 2.48 2.86 3.02 1.30 1.80
4.0 2.26 2.58 2.74 1.20 1.70
3.4 1.96 2.22 2.36 1.00 1.60
3.1 1.74 2.04 2.18 0.90 1.20
2.9 1.66 1.86 2.00 0.80 1.00
2.7 1.52 1.72 1.88 0.75 1.00
2.2 1.34 1.54 1.64 0.66 0.90
2.0 1.24 1.42 1.50 0.60 0.80
1.7 1.16 1.28 1.38 0.55 0.75
1.4 1.04 1.16 1.26 0.50 0.70
1.3 0.97 1.10 1.14 0.48 0.68
1. Please specify termination and packaging codes:
MSS1278-105KLD
Termination:L =RoHS compliant matte tin over
nickel over phos bronze.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS
tin-lead (63/37).
Packaging: D=13â³ machine-ready reel. EIA-
481 embossed plastic tape
(500 parts per full reel).
B=Less than full reel. In tape, but
not machine ready. To have a
leader and trailer added ($25
charge), use code letter D
instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc us-
ing an Agilent/HP 4263B LCR meter or equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using an Agilent/HP 4191A or
equivalent.
5. DC current at which the inductance drops the
specified amount from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount
Componentsâ before soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 322-1â Revised 04/04/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |