MSS1210 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 902-1
Shielded Power Inductors – MSS1210
• 12.3 × 12.3 mm footprint; 10 mm high shielded inductors
• 27 inductance values from 10 µH to 10 mH
• Low DCR and excellent current handling
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environment  RoHS compliant, halogen free
Terminations  RoHS compliant matte tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight:  5.1 – 6.2 g
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  300/13″ reel;  Plastic tape:  24 mm wide, 0.5 mm thick,
20 mm pocket spacing, 10.3 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
_{  Ind uctance2   D CR (Ohms)3}
SRF ^{  Isat (A)5   Irms (A)6}
  _typ4 _{10% 20% 30% 20°C  40°C}
  _{Part number}1
(µH)
typ  max (MHz) drop drop drop rise  rise
MSS1210-103ME_
MSS1210-153ME_
MSS1210-223ME_
MSS1210-333ME_
MSS1210-473ME_
10 ±20% 0.014 0.016 15.0
15 ±20% 0.019 0.022 12.0
22 ±20% 0.026 0.030 9.5
33 ±20% 0.033 0.039 7.5
47 ±20% 0.048 0.056 6.0
9.6 11.5 12.5 4.70 6.50
8.3 9.9 10.7 4.20 5.70
6.8 8.1 8.8 3.20 4.40
5.4 6.4 6.9 2.90 3.80
4.5 5.4 5.8 2.20 3.00
MSS1210-683ME_ 68 ±20% 0.068 0.080 4.5
MSS1210-104KE_ 100 ±10% 0.106 0.125 3.6
MSS1210-124KE_ 120 ±10% 0.115 0.135 3.3
MSS1210-154KE_ 150 ±10% 0.157 0.185 2.9
MSS1210-184KE_ 180 ±10% 0.173 0.203 2.8
3.8 4.5
3.1 3.7
2.9 3.4
2.6 3.1
2.3 2.8
4.9 2.10 2.80
4.0 1.80 2.40
3.7 1.70 2.30
3.4 1.26 1.75
3.0 1.20 1.70
MSS1210-224KE_ 220 ±10% 0.191 0.225 2.7
MSS1210-334KE_ 330 ±10% 0.289 0.340 1.8
MSS1210-474KE_ 470 ±10% 0.434 0.510 1.6
MSS1210-684KE_ 680 ±10% 0.536 0.630 1.4
MSS1210-105KE_ 1000 ±10% 0.816 0.960 1.1
2.1 2.5
1.7 2.1
1.4 1.7
1.2 1.4
0.98 1.2
2.8 1.10 1.50
2.2 0.85 1.20
1.8 0.70 0.98
1.6 0.69 0.91
1.3 0.60 0.83
MSS1210-125KE_
MSS1210-155KE_
MSS1210-185KE_
MSS1210-225KE_
MSS1210-275KE_
1200 ±10% 1.07 1.26
1500 ±10% 1.23 1.45
1800 ±10% 1.39 1.63
2200 ±10% 1.82 2.14
2700 ±10% 2.02 2.38
1.0 0.91 1.1 1.2 0.49 0.67
0.85 0.81 0.96 1.0 0.46 0.65
0.85 0.73 0.87 0.95 0.45 0.63
0.70 0.66 0.79 0.86 0.38 0.52
0.65 0.59 0.71 0.77 0.36 0.50
MSS1210-335KE_
MSS1210-395KE_
MSS1210-475KE_
MSS1210-565KE_
MSS1210-685KE_
3300 ±10% 2.69 3.17
3900 ±10% 2.98 3.50
4700 ±10% 3.34 3.93
5600 ±10% 3.71 4.37
6800 ±10% 4.97 5.85
0.56 0.54 0.64 0.70 0.31 0.43
0.54 0.50 0.60 0.64 0.30 0.41
0.51 0.45 0.54 0.58 0.28 0.39
0.45 0.41 0.49 0.54 0.27 0.38
0.40 0.38 0.45 0.49 0.22 0.31
MSS1210-825KE_ 8200 ±10% 5.51 6.48
MSS1210-106KE_ 10000 ±10% 7.39 8.69
0.38 0.35 0.41 0.45 0.21 0.28
0.31 0.31 0.37 0.40 0.18 0.24
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
1. Specify termination and packaging codes:
MSS1210-105KED
Termination: E = RoHS compliant matte
tin over nickel over phos
bronze.
Special order:
Q = RoHS tin-silver-
copper (95.5/4/0.5) or
P = non-RoHS tin-lead
(63/37).
Packaging: D = 13″ machine-ready reel.
EIA-481 embossed
plastic tape (300 parts
per full reel).
B = Less than full reel. In
tape, but not machine
ready. To have a leader
and trailer added ($25
charge), use code letter
D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms,
0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using Agilent/HP 4191A or
equivalent.
5. DC current at 25°C that causes the speci-
fied inductance drop from its value without
current.
Click for temperature derating information.
6. Current that causes the specified tempera-
ture rise from 25°C ambient. This informa-
tion is for reference only and does not
represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
Document 902-1  Revised 07/11/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.