MSS1048T_16 Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors

Document 844-1
HIGH ^TEMPERATURE
Shielded Power Inductors – MSS1048T
• 10.0 × 10.2 mm footprint; 4.8 mm high shielded inductors
• Designed for ambient temperatures up to 165°C.
• AEC-Q200 qualified
• Very low DCR and excellent current handling
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations  RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight:  1.7 – 1.9 g
Ambient temperature  –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature  +165°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  200/7″ reel; 800/13″ reel;  Plastic tape:  24 mm wide,
0.35 mm thick, 16 mm pocket spacing, 5.1 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.


  _{Part number}1
  _Inductance2
(µH)
MSS1048T-801NL_   0.8 ±30%
MSS1048T-152NL_   1.5 ±30%
MSS1048T-222NL_   2.2 ±30%
MSS1048T-332NL_   3.3 ±30%
MSS1048T-472NL_   4.7 ±30%
MSS1048T-682NL_   6.8 ±30%
MSS1048T-822NL_   8.2 ±30%
MSS1048T-103ML_  10 ±20%
MSS1048T-153ML_  15 ±20%
MSS1048T-223ML_  22 ±20%
MSS1048T-333ML_  33 ±20%
MSS1048T-473ML_  47 ±20%
MSS1048T-563ML_  56 ±20%
MSS1048T-683ML_  68 ±20%
MSS1048T-823ML_  82 ±20%
MSS1048T-104ML_ 100 ±20%
MSS1048T-154KL_ 150 ±10%
MSS1048T-184KL_ 180 ±10%
MSS1048T-224KL_ 220 ±10%
MSS1048T-334KL_ 330 ±10%
MSS1048T-474KL_ 470 ±10%
DCR SRF
max ^  typ³
(m) (MHz)
4.3 180
5.1 90
7.2 70
10.0 50
11.5 38
16.3 35
20.0 28
23.0 24
36.0 20
50.0 12
68.0 11
120 10
126 10
176
7.0
196
6.0
224
6.0
330
5.0
360
4.5
394
4.5
748
3.0
886
2.7
  _{Isat (A)}4 _{    Irms (A)}5
10% 20% 30% 20°C 40°C
drop drop drop rise rise
9.60 12.0 14.1
5.44 7.80 10.5
4.92 6.62 8.40
4.62 6.32 7.38
4.36 5.62 6.46
8.19 12.0
7.41 10.8
6.63 9.78
5.04 7.22
4.90 6.90
3.60 5.00 5.94 4.52 6.01
3.14 4.14 4.84 4.38 5.71
3.08 3.84 4.32 3.99 4.79
2.46 3.06 3.44 3.51 4.26
2.36 2.90 3.28 2.86 3.58
1.66 2.14 2.42 2.12 2.80
1.44 1.86 2.20 1.83 2.42
1.36 1.70 1.90 1.71 2.28
1.28 1.60 1.70 1.39 1.88
1.08 1.44 1.64 1.23 1.67
0.99 1.20 1.36 1.09 1.48
0.79 1.02 1.16 0.97 1.33
0.75 0.92 1.02 0.89 1.24
0.67 0.84 0.95 0.85 1.18
0.57 0.69 0.76 0.57 0.82
0.43 0.52 0.62 0.50 0.72
1. Please specify termination and packaging codes:
MSS1048T-334KLC
Termination: L = RoHS compliant matte tin over
nickel over copper.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (200 parts
per full reel).
B= Less than full reel. In tape, but not
machine ready. To have a leader
and trailer added ($25 charge),
use code letter C instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (800 parts
per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms,
0 Adc using an Agilent/HP 4263B LCR meter or
equivalent.
3. SRF measured using an Agilent/HP 8753D or
equivalent.
4. DC current at 25°C that causes the specified
inductance drop from its value without current.
Click for temperature derating information.
5. Current that causes the specified temperature rise
from 25°C ambient. This information is for reference
only and does not represent absolute maximum
ratings. Click for temperature derating information.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 844-1  Revised 03/31/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.