MSS1048-153MLB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors – MSS1048

Document 462 -1
Shielded Power Inductors – MSS1048
• 10 × 10.2 mm footprint; 4.8 mm high shielded inductors
• Very low DCR and excellent current handling
Designer’s Kit C409 contains 3 each of all values.
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight:  1.7 – 1.9 g
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  200/7″ reel; 800/13″ reel;  Plastic tape:  24 mm wide,
0.35 mm thick, 16 mm pocket spacing, 5.1 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf

DCR SRF
  _{Isat (A)}4 _{    Irms (A)}5
^  Inductance² max ^  typ³ 10% 20% 30% 20°C 40°C
  _{Part number}1
(µH) (m) (MHz) drop drop drop rise rise
MSS1048-801NL_   0.8 ±30%
MSS1048-152NL_   1.5 ±30%
MSS1048-222NL_   2.2 ±30%
MSS1048-332NL_   3.3 ±30%
MSS1048-472NL_   4.7 ±30%
4.3 180
5.1 90
7.2 70
10.0 50
11.5 38
9.60 12.0 14.1
5.44 7.80 10.5
4.92 6.62 8.40
4.62 6.32 7.38
4.36 5.62 6.46
8.19 12.0
7.41 10.8
6.63 9.78
5.04 7.22
4.90 6.90
MSS1048-682NL_   6.8 ±30%
MSS1048-822NL_   8.2 ±30%
MSS1048-103ML_  10 ±20%
MSS1048-153ML_  15 ±20%
MSS1048-223ML_  22 ±20%
16.3 35
20.0 28
23.0 24
36.0 20
50.0 12
3.60 5.00 5.94 4.52 6.01
3.14 4.14 4.84 4.38 5.71
3.08 3.84 4.32 3.99 4.79
2.46 3.06 3.44 3.51 4.26
2.36 2.90 3.28 2.86 3.58
MSS1048-333ML_  33 ±20%
MSS1048-473ML_  47 ±20%
MSS1048-563ML_  56 ±20%
MSS1048-683ML_  68 ±20%
MSS1048-823ML_  82 ±20%
68.0 11 1.66 2.14 2.42 2.12 2.80
120 10 1.44 1.86 2.20 1.83 2.42
126 10 1.36 1.70 1.90 1.71 2.28
176 7.0 1.28 1.60 1.70 1.39 1.88
196 6.0 1.08 1.44 1.64 1.23 1.67
MSS1048-104ML_ 100 ±20% 224
MSS1048-154KL_ 150 ±10% 330
MSS1048-184KL_ 180 ±10% 360
MSS1048-224KL_ 220 ±10% 394
MSS1048-334KL_ 330 ±10% 748
6.0 0.99 1.20 1.36 1.09 1.48
5.0 0.79 1.02 1.16 0.97 1.33
4.5 0.75 0.92 1.02 0.89 1.24
4.5 0.67 0.84 0.95 0.85 1.18
3.0 0.57 0.69 0.76 0.57 0.82
MSS1048-474KL_ 470 ±10% 886 2.7 0.43 0.52 0.62 0.50 0.72
1. Please specify termination and packaging codes:
MSS1048-334KLC
Termination: L = RoHS compliant matte tin over nickel
over copper.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-
lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (200 parts
per full reel).
B= Less than full reel. In tape, but not
machine ready. To have a leader
and trailer added ($25 charge), use
code letter C instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (800 parts
per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc
using an Agilent/HP 4263B LCR meter or equivalent.
3. SRF measured using an Agilent/HP 4192A impedance
analyzer or equivalent.
4. DC current at which the inductance drops the specified
amount from its value without current.
5. Current that causes the specified temperature rise
from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 462-1  Revised 03/25/13
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.