|
MSS1038-683MLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors – MSS1038 | |||
|
Document 378-1
Shielded Power Inductors â MSS1038
⢠10.0 à 10.2 mm footprint; 3.8 mm high shielded inductors
⢠Very low DCR and excellent current handling
Designerâs Kit C391 contains 3 each of all values.
Core materialâFerrite
Core and winding lossâ See www.coilcraft.com/coreloss
Terminationsâ RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight:â 1.5 g
Ambient temperatureâ â40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperatureâ Component: â40°C to +125°C.
Tape and reel packaging: â40°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packagingâ 250/7â³ reel; 1000/13â³ reel;â Plastic tape:â 24 mm wide,
0.35 mm thick, 16 mm pocket spacing, 4.3 mm pocket depth
PCB washingâ Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf.
DCR SRF
â Isat (A)4 âââIârms (A)5
â Inductance2 max â typ3 10% 20% 30% 20°C 40°C
â Part number1
(µH)
(mî±) (MHz) drop drop drop rise rise
MSS1038-102NL_ âââ1.0 ±30%
MSS1038-152NL_ âââ1.5 ±30%
MSS1038-252NL_ âââ2.5 ±30%
MSS1038-382NL_ âââ3.8 ±30%
MSS1038-522NL_ âââ5.2 ±30%
6.0 138
8.1 81
10 61
13 45
22 37
9.00 11.16 12.10
7.40 9.48 11.06
5.70 7.62 9.26
4.94 6.50 7.64
3.96 5.28 6.14
7.30 10.00
5.60 7.85
4.65 6.65
4.25 6.05
3.60 5.10
MSS1038-702NL_ âââ7.0 ±30% 27
MSS1038-103NL_ ââ10 ±30% 35
MSS1038-123ML_ ââ12 ±20% 41
MSS1038-153ML_ ââ15 ±20% 50
MSS1038-183ML_ ââ18 ±20% 65
33 3.62 4.74 5.60 3.10 4.35
29 3.04 3.90 4.52 2.90 4.05
25 2.72 3.48 4.04 2.85 4.00
21 2.84 3.44 3.86 2.70 3.80
18 2.44 3.10 3.52 2.25 3.35
MSS1038-223ML_ ââ22 ±20% 73
MSS1038-273ML_ ââ27 ±20% 89
MSS1038-333ML_ ââ33 ±20% 93
MSS1038-393ML_ ââ39 ±20% 112
MSS1038-473ML_ ââ47 ±20% 128
15 2.34 2.94 3.30 1.90 2.85
15 1.98 2.48 2.84 1.65 2.35
13 1.84 2.34 2.62 1.60 2.30
12 1.60 2.04 2.34 1.55 2.25
11 1.60 1.98 2.22 1.45 2.20
MSS1038-563ML_ ââ56 ±20% 180
MSS1038-683ML_ ââ68 ±20% 213
MSS1038-823ML_ ââ82 ±20% 261
MSS1038-104ML_ â100 ±20% 304
MSS1038-124KL_ â120 ±10% 380
11 1.48 1.84 2.04 1.40 1.85
10 1.32 1.62 1.82 1.15 1.75
8 1.12 1.42 1.60 1.09 1.50
6 1.02 1.30 1.46 1.05 1.45
6 0.95 1.18 1.34 0.85 1.25
MSS1038-154KL_ â150 ±10% 506
MSS1038-184KL_ â180 ±10% 582
MSS1038-224KL_ â220 ±10% 756
MSS1038-274KL_ â270 ±10% 926
MSS1038-334KL_ â330 ±10% 1090
6 0.89 1.10 1.22 0.80 1.20
5 0.89 1.02 1.16 0.71 0.98
5 0.72 0.88 0.99 0.70 0.97
4 0.66 0.81 0.91 0.65 0.86
4 0.59 0.73 0.82 0.50 0.69
MSS1038-394KL_ â390 ±10% 1141
MSS1038-474KL_ â470 ±10% 1243
MSS1038-564KL_ â560 ±10% 1696
MSS1038-684KL_ â680 ±10% 1926
MSS1038-824KL_ â820 ±10% 2596
4 0.51 0.65 0.74 0.49 0.65
3 0.50 0.62 0.70 0.45 0.63
3 0.43 0.53 0.56 0.43 0.59
3 0.38 0.48 0.52 0.36 0.50
3 0.37 0.46 0.49 0.34 0.47
MSS1038-105KL_ 1000 ±10% 2853
3 0.35 0.43 0.46 0.33 0.45
1. Please specify termination and packaging codes:
MSS1038-105KLC
Termination: L = RoHS compliant matte tin over nickel
over copper.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7â³ machine-ready reel. EIA-481
embossed plastic tape (250 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader
and trailer added ($25 charge), use
code letter C instead.
D = 13â³ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (1000 parts
per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc
using an Agilent/HP 4263B LCR meter or equivalent.
3. SRF measured using an Agilent/HP 8753D or equivalent.
4. DC current at which the inductance drops the speci-
fied amount from its value without current.
5. Current that causes the specified temperature rise
from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ
before soldering.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 378-1â Revised 08/01/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
|
▷ |