MS590PNB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High Reliability Power Inductors

1260 POWER INDUCTORS
High Reliability Power Inductors MS590PNB
■ High current, low DCR shielded power inductors
■ High temperature materials allow operation in ambient
temperatures up to 165°C.
■ Tin-lead (Sn-Pb) terminations for the best possible board
adhesion
Core material Ferrite
Terminations  Tin-lead (63/37) over tin over nickel over phos bronze.
Weight:  2.8 g – 3.3 g
Ambient temperature  –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature  Component: –55C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging  500/13″ reel;  Plastic
tape:  24 mm wide, 0.35 mm thick, 16 mm pocket spacing,
6.6 mm pocket depth
     
^  Inductance²
  DCR³
(mOhms)
  _{Part number}1
(µH)
typ  max
MS590PNB102NSZ    1.0 ±30% 5.8 6.5
MS590PNB152NSZ    1.5 ±30% 8.8 9.8
MS590PNB222NSZ    2.2 ±30% 11.5 12.8
MS590PNB332NSZ    3.3 ±30% 12.6 14.0
MS590PNB472MSZ    4.7 ±20% 13.9 15.5
MS590PNB562MSZ    5.6 ±20% 14.9 16.6
MS590PNB682MSZ    6.8 ±20% 16.6 18.5
MS590PNB822MSZ    8.2 ±20% 20.2 22.5
MS590PNB103MSZ    10 ±20% 21.5 23.9
MS590PNB123MSZ    12 ±20% 24.5 27.3
MS590PNB153MSZ    15 ±20%
MS590PNB183MSZ    18 ±20%
MS590PNB223MSZ    22 ±20%
MS590PNB273MSZ    27 ±20%
MS590PNB333MSZ    33 ±20%
30.7 34.2
35.4 39.4
36.6 40.7
51.3 57.0
54.9 61.0
MS590PNB393MSZ    39 ±20%
MS590PNB473MSZ    47 ±20%
MS590PNB563MSZ    56 ±20%
MS590PNB683MSZ    68 ±20%
MS590PNB823MSZ    82 ±20%
58.0 64.5
80.1 89.0
82.5 91.7
94.5 105.0
131.6 146.3
MS590PNB104MSZ   100 ±20%
MS590PNB124KSZ   120 ±10%
MS590PNB154KSZ   150 ±10%
MS590PNB184KSZ   180 ±10%
MS590PNB224KSZ   220 ±10%
141.8 157.6
193.3 214.8
215.4 239.4
254.2 282.5
314.1 349.0
MS590PNB274KSZ   270 ±10%
MS590PNB334KSZ   330 ±10%
MS590PNB394KSZ   390 ±10%
MS590PNB474KSZ   470 ±10%
MS590PNB564KSZ   560 ±10%
368.8 409.8
481.3 534.8
517.5 575.0
721.2 801.4
773.1 859.0
MS590PNB684KSZ   680 ±10% 867.6 964.0
MS590PNB824KSZ   820 ±10% 1158 1287
MS590PNB105KSZ 1000 ±10% 1273 1415
  SRF ⁴
(MHz)
min  typ
70 100
56 80.0
39 55.0
29 42.0
27 38.0
21 30.0
19.0 27.0
18.0 26.0
15.0 22.0
14.0 20.0
12.6 18.0
11.2 16.0
10.5 15.0
9.0 13.0
8.7 12.4
8.4 12.0
8.0 11.6
7.3 10.5
7.0 10.0
6.0 8.6
5.5 7.8
4.8 6.8
4.5 6.4
4.3 6.1
3.9 5.5
3.0 4.3
2.8 4.0
2.5 3.6
2.1 3.0
2.0 2.8
1.8 2.6
1.7 2.5
1.6 2.4
  _{Isat (A)}5 _{  Irms (A)}6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
19.12 21.18 22.76
14.44 16.40 17.64
12.32 14.00 15.08
10.88 12.22 13.12
9.92 11.10 12.00
6.00 8.00
5.30 7.60
5.20 7.30
5.00 7.00
4.50 7.00
8.54 9.60 10.38 4.00 6.40
7.80 8.80 9.44 3.80 5.90
6.44 7.38 7.98 3.40 4.80
6.00 6.92 7.48 3.00 4.00
5.68 6.56 7.08 2.80 3.70
5.34 6.04 6.54 2.60 3.50
4.82 5.54 6.00 2.50 3.30
4.42 5.04 5.44 2.30 3.10
3.78 4.32 4.68 2.10 2.90
3.50 4.00 4.34 2.00 2.70
3.32 3.80 4.14 1.90 2.60
2.84 3.26 3.54 1.85 2.50
2.64 3.04 3.28 1.75 2.40
2.46 2.82 3.04 1.70 2.30
2.24 2.54 2.74 1.60 2.20
2.06 2.34 2.54 1.50 2.10
1.84 2.08 2.28 1.38 1.85
1.64 1.90 2.06 1.20 1.66
1.46 1.70 1.84 1.14 1.58
1.30 1.48 1.60 1.00 1.42
1.18 1.38 1.48
1.04 1.20 1.30
1.00 1.16 1.28
0.906 1.00 1.10
0.872 0.980 1.02
0.90 1.45
0.84 1.16
0.78 1.08
0.70 0.96
0.64 0.88
0.782 0.886 0.956 0.58 0.80
0.692 0.784 0.854 0.53 0.73
0.588 0.672 0.726 0.48 0.68
1. When ordering, please specify testing code:
MS590PNB824KSZ
Testing: Z = COTS
H = Screening per Coilcraft
CP‑SA‑10001
N = Screening per Coilcraft
CP‑SA‑10004
2. Inductance tested at 100 kHz, 0.1 Vrms,
0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using an Agilent/HP 8753D
network analyzer.
5. DC current at which the inductance drops
the specified amount from its value without
current.
6. Current that causes the specified tempera-
ture rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
®
Specifications subject to change without notice.
Please check our website for latest information. Document MS599-1  Revised 09/19/11
© Coilcraft, Inc. 2011
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com