|
MS558PTA Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High-Reliability Power Inductors | |||
|
POWER INDUCTORS
High-Reliability Power Inductors MS558PTA
â High temperature materials allow operation in ambient
temperatures up to 155°C.
â Tin-lead (Sn-Pb) termination for the best possible board
adhesion
â Excellent current handling; very low DCR
Core materialâFerrite
Terminationsâ Tin-lead over tin over nickel over phos bronze.
Weightâ 1.6 g
Ambient temperatureâ â55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperatureâ Component: â55°C to +155°C.
Tape and reel packaging: â55°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packagingâ 200/7â³ reel
Plastic tape: 24 mm wide,0.4 mm thick, 16 mm pocket spacing,
5.45 mm pocket depth
Inductance2 âDCR max3 â SRF (MHz)4
â Part number1 â±20% (µH) (mOhm)
minâââ typ
MS558PTA331MSZ
0.33
4.0
119
170
MS558PTA801MSZ
0.80
4.0
70.0 100
MS558PTA102MSZ
1.0
4.0
66.5
95.0
MS558PTA122MSZ
1.2
6.0
63.7
91.0
MS558PTA132MSZ
1.3
4.0
56.7
81.0
MS558PTA152MSZ
1.5
MS558PTA182MSZ
1.8
MS558PTA202MSZ
2.0
MS558PTA222MSZ
2.2
MS558PTA252MSZ
2.5
6.0
52.5
75.0
6.0
49.0
70.0
9.0
45.5
65.0
4.0
40.6
58.0
7.5
38.5
55.0
MS558PTA322MSZ
3.2
MS558PTA402MSZ
4.0
MS558PTA432MSZ
4.3
MS558PTA572MSZ
5.7
6.0
37.1
53.0
9.0
32.9
47.0
7.5
30.8
44.0
9.0
24.5
35.0
âIsat (A)5
10% drop 20% drop 30% drop
29.5
30.0
30.5
24.9
25.2
25.6
16.5
17.0
17.5
20.5
21.0
21.3
12.9
16.8
17.2
13.5
14.0
14.5
13.3
13.8
14.3
15.3
15.8
16.2
8.9
9.6
10.0
11.4
11.8
12.1
7.3
7.8
8.5
8.3
8.5
8.8
6.4
6.8
7.0
5.4
5.8
6.0
1. When ordering, please specify testing code:
MS558PTA103MSZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer.
5. Typical DC current at which the inductance drops the specified amount from its value without current.
6. Typical current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
â Irms (A)6
20°C riseâ 40°C rise
12.5
16.3
12.5
16.3
12.5
16.3
11.0
15.0
12.5
16.3
11.0
15.0
11.0
15.0
8.5
11.5
12.5
16.3
9.0
12.0
11.0
15.0
8.5
11.5
9.0
12.0
8.5
11.5
© Coilcraft, Inc. 2012
Document MS535-1â Revised 12/05/10
®
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email cps@coilcraft.com
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
|
▷ |