MS512PJB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High-Reliability Power Inductors

6235 POWER INDUCTORS
High-Reliability Power Inductors MS512PJB
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Special construction allows it to pass vibration testing to
80 G and shock testing to 1000 G.
■ Tin-lead (Sn-Pb) termination for the best possible board
adhesion
Core material Ferrite
Terminations  Tin-lead (63/37) over tin over nickel.
Weight  460 – 480 mg
Ambient temperature  –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging  350/7″reel
Plastic tape:  12 mm wide, 0.3 mm thick, 8 mm pocket spacing,
3.68 mm pocket depth
Recommended pick and place nozzle  OD: 6.2 mm;  ID: ≤ 3.1 mm
      DCR^3
  Inductance² max
  _{Part number}1 _{±20% (µH) (Ohms)}
MS512PJB682MSZ
6.8
MS512PJB822MSZ
8.2
MS512PJB103MSZ 10.0
MS512PJB123MSZ 12.0
MS512PJB153MSZ 15.0
0.075
0.095
0.100
0.110
0.125
MS512PJB183MSZ 18.0
MS512PJB223MSZ 22.0
MS512PJB333MSZ 33.0
MS512PJB473MSZ 47.0
MS512PJB563MSZ 56.0
0.140
0.145
0.180
0.245
0.280
MS512PJB683MSZ
MS512PJB823MSZ
MS512PJB104MSZ
MS512PJB124MSZ
MS512PJB154MSZ
68.0
82.0
100.0
120.0
150.0
0.345
0.315
0.375
0.435
0.535
MS512PJB224MSZ
MS512PJB334MSZ
MS512PJB474MSZ
MS512PJB564MSZ
MS512PJB684MSZ
220.0
330.0
470.0
560.0
680.0
0.720
1.02
1.58
1.75
1.97
MS512PJB824MSZ 820.0
2.70
MS512PJB105MSZ 1000.0
3.20
MS512PJB155MSZ 1500.0
4.60
MS512PJB185MSZ 1800.0
5.42
MS512PJB225MSZ 2200.0
6.40
MS512PJB335MSZ
MS512PJB475MSZ
MS512PJB565MSZ
MS512PJB685MSZ
MS512PJB825MSZ
3300.0
4700.0
5600.0
6800.0
8200.0
8.90
14.0
16.4
21.4
24.0
MS512PJB106MSZ 10000.0 29.0
SRF
  (MHz)⁴
min  typ
  _{Isat (A)}5 _{    Irms (A)}6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
39 55 2.6 2.7 2.8 1.0 1.5
34 48 2.5 2.6 2.7 1.0 1.5
26 37 2.3 2.4 2.5 1.0 1.4
20 29 1.9 2.2 2.3 1.0 1.4
18 25 1.9 2.0 2.0 0.97 1.4
17 24
17 24
11 16
9.0 13
8.4 12
1.7 1.8 1.9 0.96 1.3
1.6 1.7 1.7 0.88 1.3
1.3 1.4 1.5 0.80 1.0
1.1 1.2 1.2 0.64 0.92
1.0 1.0 1.1 0.60 0.86
7.6 10.8 0.90 0.94 0.96 0.58 0.80
7.0 10.0 0.46 0.52 0.55 0.58 0.76
6.3 9.0 0.46 0.52 0.54 0.56 0.72
5.8 8.3 0.44 0.48 0.51 0.48 0.64
5.1 7.3 0.37 0.43 0.45 0.42 0.58
4.0 5.6 0.31 0.36 0.37 0.36 0.51
3.0 4.4 0.26 0.29 0.30 0.32 0.44
2.5 3.6 0.22 0.25 0.26 0.29 0.40
2.2 3.1 0.20 0.22 0.23 0.26 0.37
2.0 2.8 0.17 0.19 0.21 0.22 0.32
1.8 2.5 0.16 0.18 0.19 0.21 0.26
1.5 2.2 0.14 0.17 0.18 0.19 0.24
1.3 1.9 0.12 0.13 0.14 0.15 0.21
1.2 1.7 0.11 0.12 0.13 0.14 0.18
1.0 1.5 0.090 0.11 0.11 0.13 0.18
0.8 1.1 0.080 0.090 0.10 0.11 0.14
0.66 0.94 0.070 0.077 0.084 0.095 0.12
0.6 0.86 0.070 0.080 0.085 0.080 0.10
0.56 0.80 0.070 0.075 0.080 0.070 0.095
0.49 0.70 0.062 0.070 0.078 0.065 0.090
0.43 0.61 0.059 0.067 0.074 0.060 0.075
1. When ordering, please specify testing code:
MS512PJB106MSZ
Testing: Z = COTS
H = Screening per Coilcraft
CP-SA-10001
N = Screening per Coilcraft
CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms using
an Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES
or equivalent.
5. Typical DC current that causes the specified
inductance drop from its value without current.
6. Typical current that causes the specified
temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
© Coilcraft, Inc. 2011
®
Specifications subject to change without notice.
Please check our website for latest information. Document MS587-1  Revised 03/25/11b
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com