MS414PJB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High-Reliability Power Inductors

3314 POWER INDUCTORS
High-Reliability Power Inductors MS414PJB
■ High temperature material allows operation in ambient
temperatures up to 155°C
■ Special construction allows it to pass vibration testing to
80 G and shock testing to 1000 G.
■ Tin-lead (Sn-Pb) termination for the best possible board
adhesion
Core material Ferrite
Terminations  Tin-lead (63/37) over tin over nickel.
Weight  44.1 – 46.5 mg
Ambient temperature  –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging  1000/7″reel
Plastic tape:  12 mm wide, 0.3 mm thick, 8 mm pocket spacing,
1.52 mm pocket depth
Recommended pick and place nozzle  OD: 3.3 mm;  ID: ≤ 1.65 mm
^  Inductance DCR
  _{Isat (A)}5 _{   Irms (A)}6
^  ±20%^{2  } max^{3   SRF (MHz)4} 10% 20% 30% 20°C 40°C
  _{Part number}1 _{(µH) (Ohms)}   _{min  typ drop drop drop rise rise}
MS414PJB102MSZ
MS414PJB222MSZ
MS414PJB332MSZ
MS414PJB472MSZ
MS414PJB562MSZ
1.0 0.055 150 215 1.8 1.9 1.9 1.3 1.7
2.2 0.100 98.0 140 1.1 1.4 1.5 0.96 1.3
3.3 0.145 80.5 115 0.98 1.2 1.3 0.80 1.1
4.7 0.175 60.2 86 0.97 0.99 1.0 0.72 1.0
5.6 0.220 51.8 74 0.92 0.95 0.98 0.66 0.88
MS414PJB682MSZ 6.8
MS414PJB822MSZ 8.2
MS414PJB103MSZ 10
MS414PJB153MSZ 15
MS414PJB183MSZ 18
0.240 50.4 72
0.270 42.0 60
0.330 38.5 55
0.440 31.5 45
0.575 25.9 37
0.82 0.83 0.86 0.66 0.88
0.58 0.75 0.78 0.56 0.80
0.56 0.66 0.70 0.52 0.70
0.46 0.56 0.59 0.50 0.66
0.44 0.51 0.54 0.42 0.54
MS414PJB223MSZ 22
MS414PJB333MSZ 33
MS414PJB473MSZ 47
MS414PJB563MSZ 56
MS414PJB683MSZ 68
0.720 23.8 34
0.920 18.9 27
1.40 15.4 22
1.55 13.3 19
1.80 11.9 17
0.44 0.48 0.49 0.36 0.48
0.30 0.38 0.40 0.34 0.46
0.28 0.33 0.34 0.28 0.38
0.26 0.30 0.31 0.26 0.34
0.22 0.26 0.29 0.24 0.32
MS414PJB823MSZ 82
MS414PJB104MSZ 100
MS414PJB124MSZ 120
MS414PJB154MSZ 150
MS414PJB184MSZ 180
2.00 9.8 14 0.20 0.24 0.26 0.23 0.31
2.75 9.1 13 0.19 0.23 0.24 0.21 0.30
3.45 7.7 11 0.19 0.21 0.22 0.18 0.24
4.10 7.0 10 0.16 0.19 0.20 0.16 0.22
4.80 6.3 9.0 0.14 0.17 0.18 0.15 0.20
MS414PJB224MSZ 220
MS414PJB334MSZ 330
MS414PJB474MSZ 470
MS414PJB564MSZ 560
MS414PJB684MSZ 680
6.00
9.30
12.0
14.0
18.5
4.90 7.0 0.14 0.16 0.17 0.13 0.18
4.20 6.0 0.11 0.12 0.13 0.10 0.14
3.15 4.5 0.080 0.11 0.11 0.10 0.13
3.15 4.5 0.095 0.105 0.11 0.090 0.12
2.80 4.0 0.092 0.100 0.105 0.080 0.10
MS414PJB824MSZ 820 24.0
MS414PJB105MSZ 1000 31.0
MS414PJB155MSZ 1500 44.0
2.59 3.7 0.086 0.099 0.100 0.070 0.090
2.10 3.0 0.090 0.099 0.100 0.065 0.080
1.89 2.7 0.080 0.086 0.090 0.050 0.060
1. When ordering, please specify testing code:
MS414PJB105MSZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms using
an Agilent/HP 4192A. Inductance at 1 MHz is
the same for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or
equivalent.
5. DC current that causes the specified induc-
tance drop from its value without current.
6. Current that causes the specified temperature
rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Com-
ponents” before soldering.
© Coilcraft, Inc. 2012
Document MS541-1  Revised 09/24/12
®
1102 Silver Lake Road
Cary, IL 60013
Phone [phone]
Fax [phone]
Email [e-mail]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.