MS410PZA Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High Reliability Power Inductors

3012 POWER INDUCTORS
High Reliability Power Inductors  MS410PZA
■ High temperature materials allow operation in ambient
temperatures up to 155°C
■ Tin-lead (Sn-Pb) termination for the best possible board
adhesion
■ Low profile, ultra-miniature, shielded power inductor
■ Soft saturation makes them ideal for VRM/VRD
applications.
Terminations  Tin-lead (63/37) over tin over nickel over silver.
Core material Composite
Weight  53 mg
Ambient temperature  –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging  2000/7″reel; 7500/13″ reel
Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing,
1.25 mm pocket depth
^  Inductance²   ^{DCR (Ohms)3}
  _{Part number}1
±20% (µH)
typ    max
MS410PZA221MSZ
0.22
MS410PZA361MSZ
0.36
MS410PZA601MSZ
0.60
MS410PZA102MSZ
1.0
MS410PZA152MSZ
1.5
14
19
19
23
23
29
35
42
60
72
MS410PZA222MSZ
2.2
MS410PZA332MSZ
3.3
MS410PZA472MSZ
4.7
81
97
106
127
143
171
 SRF (MHz)⁴
min    typ
272
168
133
92.0
75.5
340
210
167
115
94.4
58.5 73.2
49.3 61.6
42.1 52.6
10% drop
2.5
2.3
1.9
1.6
1.3
1.0
0.87
0.72
  _{Isat (A)}5
20% drop 30% drop
3.5
4.1
3.1
3.5
2.6
3.0
2.2
2.5
1.8
2.2
1.3
1.6
1.2
1.4
1.0
1.2
  _{Irms (A)}6
20°C rise  40°C rise
2.6
3.5
2.2
3.0
2.1
2.8
1.9
2.6
1.6
2.2
1.4
1.9
1.2
1.6
1.0
1.4
1. When ordering, please specify testing code:
MS410PZA472MSZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
C = Custom screening (please specify when ordering)
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. Typical dc current at which the inductance drops the specified amount from its value without current.
6. Typical current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2012
®
Specifications subject to change without notice.
Please check our website for latest information. Document MS747-1  Revised 02/09/11
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com