MS338PWA Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High Reliability Power Inductors

2010 POWER INDUCTORS
High Reliability Power Inductors MS338PWA
■ High temperature materials allow operation in ambient
temperatures up to 155°C
■ Very low DCR and excellent current handling.
■ Soft saturation makes them ideal for VRM/VRD applications.
■ Tin-lead (Sn-Pb) termination for the best possible board
adhesion
■ Special construction allows it to pass vibration testing to
30 G and shock testing to 500 G.
Weight  20 mg
Terminations  Tin-lead (63/37) over tin over nickel over silver.
Ambient temperature  –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging   1000/7″reel
Plastic tape:  8 mm wide, 0.23 mm thick, 4 mm pocket spacing,
1.19 mm pocket depth


  _Inductance2
 _{DCR (Ohms)}3   _{SRF (MHz)}4
  _{Part number}1
±20% (µH)
nom    max
min    typ 10% drop
MS338PWA201MSZ
0.20
0.024 0.027 286 408
2.80
MS338PWA331MSZ
0.33
0.031 0.035 216 309
1.90
MS338PWA501MSZ
0.50
0.040 0.045 153 218
1.80
MS338PWA681MSZ
0.68
0.057 0.063 106 152
1.55
MS338PWA821MSZ
0.82
0.068 0.075
93 132
1.25
MS338PWA102MSZ
1.0
MS338PWA152MSZ
1.5
MS338PWA222MSZ
2.2
MS338PWA332MSZ
3.3
MS338PWA472MSZ
4.7
0.081
0.105
0.156
0.207
0.336
0.089
0.116
0.173
0.228
0.370
82 117
56
80
53
75
39
55
28
40
1.20
0.950
0.940
0.700
0.580
MS338PWA682MSZ
6.8
MS338PWA822MSZ
8.2
MS338PWA103MSZ
10
0.421 0.463
23
33
0.457 0.503
21
30
0.555 0.611
20
28
0.450
0.440
0.390
 Isat (A)⁵      Irms (A)⁶
20% drop 30% drop 20°C rise 40°C rise
3.45
3.75
2.75
3.05
2.35
2.64
1.95
2.19
1.65
1.90
2.2
2.8
1.9
2.6
1.7
2.3
1.5
2.1
1.3
1.7
1.60
1.30
1.20
0.925
0.750
1.80
1.50
1.35
1.05
0.845
1.1
1.6
1.0
1.4
0.96
1.3
0.79
1.1
0.74
1.0
0.620
0.600
0.525
0.725
0.670
0.610
0.64
0.87
0.55
0.75
0.49
0.66
1. When ordering, please specify testing code:
MS338PWA224MSZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its
value without current.
6. Current that causes the specified temperature rise fron 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2012
®
Specifications subject to change without notice.
Please check our website for latest information. Document MS646-1  Revised 06/28/12
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com