MS336RAD Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High Reliability Chip Inductors

0805 CHIP INDUCTORS
High Reliability Chip Inductors MS336RAD
The MS336RAD inductors provide exceptional Q values,
even at high frequencies. They have a ceramic body and
wire wound construction to provide the highest SRFs,
tight inductance tolerance and batch consistency.
This robust version of Coilcraft’s standard 0805HQ series
features high temperature materials that allow operation
in ambient temperatures up to 155°C.The leach-resistant
base metalization with tin-lead (Sn-Pb) terminations
ensures the best possible board adhesion.
 Inductance²
Part number¹
(nH)
MS336RAD2N5JSZ
MS336RAD5N6JSZ
MS336RAD6N2JSZ
MS336RAD12NJSZ
MS336RAD16N_SZ
2.5 @ 250 MHz
5.6 @ 250 MHz
6.2 @ 250 MHz
12 @ 250 MHz
16 @ 250 MHz
MS336RAD18N_SZ
MS336RAD20N_SZ
MS336RAD27N_SZ
MS336RAD30N_SZ
MS336RAD39N_SZ
18 @ 250 MHz
20 @ 250 MHz
27 @ 250 MHz
30 @ 250 MHz
39 @ 250 MHz
MS336RAD48N_SZ
MS336RAD51N_SZ
48 @ 200 MHz
51 @ 200 MHz
Percent  SRF min⁴
tolerance
Q min³
(GHz)
5
56 @ 1000 MHz
>5.00
5
83 @ 1000 MHz
4.88
5
80 @ 1000 MHz
4.55
5
52 @ 500 MHz
2.80
5,2
72 @ 500 MHz
2.40
5,2
70 @ 500 MHz
2.20
5,2
54 @ 250 MHz
2.05
5,2,1
58 @ 250 MHz
2.00
5,2,1
50 @ 250 MHz
1.74
5,2,1
53 @ 250 MHz
1.60
5,2,1
44 @ 150 MHz
1.40
5,2,1
36 @ 150 MHz
1.28
DCR max⁵
(Ohms)
0.020
0.035
0.035
0.045
0.060
0.060
0.060
0.070
0.095
0.110
0.095
0.120
Imax
(A)
2.0
1.9
1.8
1.6
1.4
1.4
1.4
1.3
1.1
1.0
1.1
0.9
1. When ordering, please specify tolerance and testing codes:
MS336RAD51NGSZ
Tolerance: F = 1%  G = 2%  J = 5%
Testing: Z = COTS
H = Screening per Coilcraft CP‑SA‑10001
N = Screening per Coilcraft CP‑SA‑10003
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286 impedance analyzer or equivalent with Coilcraft-provided correla-
tion pieces.
3. Q measured at the same frequency as inductance using an Agilent/HP
4291A with an Agilent/HP 16197 test fixture or equivalents.
4. SRF measured using an Agilent/HP 8753ES network analyzer or
equivalent and a Coilcraft SMD-D test fixture.
5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a
Coilcraft CCF858 test fixture.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Core material Ceramic
Terminations  Tin-lead (63/37) over silver-platinum-glass frit
Ambient temperature  –55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL)  +25 to +155 ppm/°C
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging   2000 per 7″ reel
Plastic tape:  8 mm wide, 0.23 mm thick, 4 mm pocket spacing,
1.65 mm pocket depth
© Coilcraft, Inc. 2012
®
Document MS197-1  Revised 11/06/12
1102 Silver Lake Road
Cary, IL 60013
Phone [phone]
Fax [phone]
Email [e-mail]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.