MS319PZA Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High-Reliability Power Inductors

2005 POWER INDUCTORS
High-Reliability Power Inductors MS319PZA
■ High temperature material allows operation in ambient
temperatures up to 155°C
■ Tin-lead (Sn-Pb) termination for the best possible board
adhesion
■ Lowest profile, ultra-miniature, magnetically shielded
power inductor; only 0.5 mm high, 2 mm × 2 mm footprint
■ Soft saturation makes them ideal for VRM/VRD applications.
■ Special construction allows it to pass vibration testing to
80 G and shock testing to 1000 G.
Core material Composite
Terminations  Tin-lead (63/37) over tin over nickel over silver-platinum.
Weight  8.4 mg
Ambient temperature  –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging  2000/7″reel
Plastic tape:  8 mm wide, 0.28 mm thick, 4 mm pocket spacing,
0.76 mm pocket depth

  _{Part number}1
MS319PZA151MSZ
MS319PZA221MSZ
MS319PZA331MSZ
MS319PZA471MSZ
MS319PZA681MSZ
  _Inductance2
±20% (µH)
0.15
0.22
0.33
0.47
0.68
 DCR (Ohms)³
nom     max
0.085
0.111
0.144
0.177
0.215
0.098
0.128
0.166
0.204
0.247
 SRF typ⁴
(MHz)
590
480
380
275
220
10% drop
1.05
0.72
0.65
0.60
0.50
 Isat (A)⁵
 Irms (A)⁶
20% drop 30% drop 20°C rise  40°C rise
1.55
1.90
1.20
1.50
1.05
1.30
0.97
1.20
0.75
0.95
1.25
1.60
1.13
1.48
1.00
1.30
0.95
1.25
0.80
1.05
1. When ordering, please specify testing code:
MS319PZA681MSZ
Testing:
Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its
value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.079 ±0.008
2,0 ±0,2
0.075 ±0.008
1,9 ±0,2
0.020
0,50
max
0.030 _max
0,75
ReScuogmgmesetnedded
Land Pattern
0.057
1,45
0.069
1,75
max
0.087
2,2
0.014
0,35
min
Dimensions are in
inches
mm
0.041
1,04
© Coilcraft, Inc. 2012
®
Specifications subject to change without notice.
Please check our website for latest information. Document MS779-1  Revised 04/18/12
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com