MOS6020-222MLC Datasheet, PDF (1/2 Pages) Coilcraft lnc. – Shielded Power Inductors – MOS6020

Document 287 -1
Shielded Power Inductors – MOS6020
• 6.0 × 7.1 mm footprint; 2.4 mm high shielded inductors
• Custom versions up to 4.7 mH are available.
Designer’s Kit C359 contains 3 of each value
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant matte tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight  0.21 g
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  500 per 7″ reel; 2000 per 13″ reel; Plastic tape:  16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 2.5 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Part number¹
  _Inductance2
±20% (µH)
MOS6020-222ML_
2.2
MOS6020-332ML_
3.3
MOS6020-472ML_
4.7
MOS6020-682ML_
6.8
MOS6020-822ML_
8.2
MOS6020-103ML_
10
MOS6020-153ML_
15
MOS6020-223ML_
22
MOS6020-333ML_
33
MOS6020-473ML_
47
MOS6020-683ML_
68
MOS6020-104ML_ 100
MOS6020-154ML_ 150
MOS6020-224ML_ 220
MOS6020-334ML_ 330
MOS6020-474ML_ 470
DCR max  SRF typ³
(Ohms)
(MHz)
0.035
110
0.046
85
0.050
60
0.078
55
0.085
45
0.092
36
0.130
30
0.182
22
0.290
20
0.420
16
0.520
15
0.800
13
1.28
10
2.00
8
2.84
7
4.40
5
1. When ordering, please specify termination and packaging codes:
MOS6020-104MLC
Termination: L = RoHS compliant matte tin over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (500 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (2000 parts per
full reel).
10% drop
2.86
1.90
1.46
1.32
0.94
0.79
0.83
0.79
0.57
0.45
0.37
0.35
0.26
0.22
0.18
0.15
2 _{Isat (A)}4
20% drop
3.26
2.28
1.82
1.56
1.18
0.95
0.95
0.92
0.67
0.56
0.45
0.40
0.30
0.26
0.22
0.17
         _{Irms (A)}5
30% drop 20°C rise 40°C rise
3.56
3.0
4.1
2.46
2.6
3.6
1.94
2.3
3.1
1.72
1.9
2.7
1.30
1.7
2.3
1.06
1.6
2.2
1.03
1.3
1.8
0.97
1.0
1.4
0.74
0.80
1.1
0.62
0.50
0.7
0.51
0.45
0.63
0.44
0.40
0.56
0.33
0.35
0.49
0.28
0.30
0.42
0.24
0.25
0.35
0.19
0.22
0.29
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/
HP 4263B LCR meter or equivalent.
3. SRF measured using Agilent/HP 8753D network analyzer.
4. DC current at which the inductance drops the specified amount from
its value without current.
5. Current that causes the specified temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US [phone] [e-mail]
UK [phone] [e-mail]
Taiwan [phone] [e-mail]
China [phone] [e-mail]
Singapore + 65-6484 8412 [e-mail]
Document 287-1  Revised 10/06/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.