MOS6020-222ML Datasheet, PDF (1/2 Pages) Coilcraft lnc. – SMT Power Inductors

Document 287 -1
SMT Power Inductors – MOS6020
Part number¹
MOS6020-222ML_
MOS6020-332ML_
MOS6020-472ML_
MOS6020-682ML_
MOS6020-822ML_
MOS6020-103ML_
MOS6020-153ML_
MOS6020-223ML_
MOS6020-333ML_
MOS6020-473ML_
MOS6020-683ML_
MOS6020-104ML_
MOS6020-154ML_
MOS6020-224ML_
MOS6020-334ML_
MOS6020-474ML_
Inductance²
±20% (µH)
2.2
3.3
4.7
6.8
8.2
10
15
22
33
47
68
100
150
220
330
470
DCR max
(Ohms)
0.035
0.046
0.050
0.078
0.085
0.092
0.130
0.182
0.290
0.420
0.520
0.800
1.28
2.00
2.84
4.40
SRF typ³
(MHz)
110
85
60
55
45
36
30
22
20
16
15
13
10
8
7
5
1. When ordering, please specify termination and packaging codes:
MOS6020-104MLC
Termination: L = RoHS compliant matte tin over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (500 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
• 6.0 × 7.1 mm footprint; 2.4 mm high shielded inductors
• Custom versions up to 4.7 mH are available.
Designer’s Kit C359 contains 3 of each value
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight 0.21 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500 per 7″reel; 2000 per 13″ reel; Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 2.5 mm pocket depth
PCB washing Only pure water or alcohol recommended
10% drop
2.86
1.90
1.46
1.32
0.94
0.79
0.83
0.79
0.57
0.45
0.37
0.35
0.26
0.22
0.18
0.15
2 _{Isat (A)}4
20% drop
3.26
2.28
1.82
1.56
1.18
0.95
0.95
0.92
0.67
0.56
0.45
0.40
0.30
0.26
0.22
0.17
30% drop
3.56
2.46
1.94
1.72
1.30
1.06
1.03
0.97
0.74
0.62
0.51
0.44
0.33
0.28
0.24
0.19
Irms (A)⁵
20°C rise 40°C rise
3.0
4.1
2.6
3.6
2.3
3.1
1.9
2.7
1.7
2.3
1.6
2.2
1.3
1.8
1.0
1.4
0.80
1.1
0.50
0.7
0.45
0.63
0.40
0.56
0.35
0.49
0.30
0.42
0.25
0.35
0.22
0.29
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/
HP 4263B LCR meter or equivalent.
3. SRF measured using Agilent/HP 8753D network analyzer.
4. DC current at which the inductance drops the specified amount from
its value without current.
5. Current that causes the specified temperature rise from 25°C
ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 287-1 Revised 10/06/08