ML558PTA Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High-Reliability Power Inductors

POWER INDUCTORS
High-Reliability Power Inductors ML558PTA
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Excellent current handling; very low DCR
Core material Ferrite
Terminations  Tin-silver over tin over nickel over phos bronze (pins 1
and 2); Matte tin over nickel over phos bronze (pin 3).
Weight  1.6 g
Ambient temperature  –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging  200/7″ reel
Plastic tape: 24 mm wide,0.4 mm thick, 16 mm pocket spacing,
5.45 mm pocket depth
Inductance²  DCR max³   ^{SRF (MHz)4}
  _{Part number}1 _{ ±20% (µH) (mOhm)}
min    typ
ML558PTA331MLZ
0.33
4.0
119
170
ML558PTA801MLZ
0.80
4.0
70.0 100
ML558PTA102MLZ
1.0
4.0
66.5
95.0
ML558PTA122MLZ
1.2
6.0
63.7
91.0
ML558PTA132MLZ
1.3
4.0
56.7
81.0
ML558PTA152MLZ
1.5
6.0
52.5
75.0
ML558PTA182MLZ
1.8
6.0
49.0
70.0
ML558PTA202MLZ
2.0
9.0
45.5
65.0
ML558PTA222MLZ
2.2
4.0
40.6
58.0
ML558PTA252MLZ
2.5
7.5
38.5
55.0
ML558PTA322MLZ
3.2
6.0
37.1
53.0
ML558PTA402MLZ
4.0
9.0
32.9
47.0
ML558PTA432MLZ
4.3
7.5
30.8
44.0
ML558PTA572MLZ
5.7
9.0
24.5
35.0
10% drop
29.5
24.9
16.5
20.5
12.9
13.5
13.3
15.3
8.9
11.4
7.3
8.3
6.4
5.4
 _{Isat (A)}5
20% drop 30% drop
30.0
30.5
25.2
25.6
17.0
17.5
21.0
21.3
16.8
17.2
14.0
14.5
13.8
14.3
15.8
16.2
9.6
10.0
11.8
12.1
7.8
8.5
8.5
8.8
6.8
7.0
5.8
6.0
  _{Irms (A)}6
20°C rise  40°C rise
12.5
16.3
12.5
16.3
12.5
16.3
11.0
15.0
12.5
16.3
11.0
15.0
11.0
15.0
8.5
11.5
12.5
16.3
9.0
12.0
11.0
15.0
8.5
11.5
9.0
12.0
8.5
11.5
1. When ordering, please specify testing code:
ML558PTA572MLZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer.
5. Typical DC current at which the inductance drops the specified amount from its value without current.
6. Typical current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2012
Document ML535-1  Revised12/05/12
®
1102 Silver Lake Road
Cary, IL 60013
Phone [phone]
Fax [phone]
Email [e-mail]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.