ML512PJB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High-Reliability Power Inductors

6235 POWER INDUCTORS
High-Reliability Power Inductors ML512PJB
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Special construction allows it to pass vibration testing to
80 G and shock testing to 1000 G.
Core material Ferrite
Terminations  Silver-palladium-platinum-glass frit
Weight  460 – 480 mg
Ambient temperature  –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging  350/7″reel
Plastic tape:  12 mm wide, 0.3 mm thick, 8 mm pocket spacing,
3.68 mm pocket depth
Recommended pick and place nozzle  OD: 6.2 mm;  ID: ≤ 3.1 mm
      DCR^3
  Inductance² max
  _{Part number}1 _{±20% (µH) (Ohms)}
ML512PJB682MLZ
6.8
0.075
ML512PJB822MLZ
8.2
0.095
ML512PJB103MLZ
10.0
0.100
ML512PJB123MLZ
12.0
0.110
ML512PJB153MLZ
15.0
0.125
ML512PJB183MLZ
18.0
0.140
ML512PJB223MLZ
22.0
0.145
ML512PJB333MLZ
33.0
0.180
ML512PJB473MLZ
47.0
0.245
ML512PJB563MLZ
56.0
0.280
ML512PJB683MLZ
ML512PJB823MLZ
ML512PJB104MLZ
ML512PJB124MLZ
ML512PJB154MLZ
68.0
82.0
100.0
120.0
150.0
0.345
0.315
0.375
0.435
0.535
ML512PJB224MLZ
ML512PJB334MLZ
ML512PJB474MLZ
ML512PJB564MLZ
ML512PJB684MLZ
220.0
330.0
470.0
560.0
680.0
0.720
1.02
1.58
1.75
1.97
ML512PJB824MLZ 820.0
2.70
ML512PJB105MLZ 1000.0
3.20
ML512PJB155MLZ 1500.0
4.60
ML512PJB185MLZ 1800.0
5.42
ML512PJB225MLZ 2200.0
6.40
ML512PJB335MLZ
ML512PJB475MLZ
ML512PJB565MLZ
ML512PJB685MLZ
ML512PJB825MLZ
3300.0
4700.0
5600.0
6800.0
8200.0
8.90
14.0
16.4
21.4
24.0
ML512PJB106MLZ 10000.0 29.0
SRF
  (MHz)⁴
min    typ
  _{Isat (A)}5 _{    Irms (A)}6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
39 55 2.6 2.7 2.8 1.0 1.5
34 48 2.5 2.6 2.7 1.0 1.5
26 37 2.3 2.4 2.5 1.0 1.4
20 29 1.9 2.2 2.3 1.0 1.4
18 25 1.9 2.0 2.0 0.97 1.4
17 24
17 24
11 16
9.0 13
8.4 12
1.7 1.8 1.9 0.96 1.3
1.6 1.7 1.7 0.88 1.3
1.3 1.4 1.5 0.80 1.0
1.1 1.2 1.2 0.64 0.92
1.0 1.0 1.1 0.60 0.86
7.6 10.8 0.90 0.94 0.96 0.58 0.80
7.0 10.0 0.46 0.52 0.55 0.58 0.76
6.3 9.0 0.46 0.52 0.54 0.56 0.72
5.8 8.3 0.44 0.48 0.51 0.48 0.64
5.1 7.3 0.37 0.43 0.45 0.42 0.58
4.0 5.6 0.31 0.36 0.37 0.36 0.51
3.0 4.4 0.26 0.29 0.30 0.32 0.44
2.5 3.6 0.22 0.25 0.26 0.29 0.40
2.2 3.1 0.20 0.22 0.23 0.26 0.37
2.0 2.8 0.17 0.19 0.21 0.22 0.32
1.8 2.5 0.16 0.18 0.19 0.21 0.26
1.5 2.2 0.14 0.17 0.18 0.19 0.24
1.3 1.9 0.12 0.13 0.14 0.15 0.21
1.2 1.7 0.11 0.12 0.13 0.14 0.18
1.0 1.5 0.090 0.11 0.11 0.13 0.18
0.88 1.1 0.080 0.090 0.10 0.11 0.14
0.66 0.94 0.070 0.077 0.084 0.095 0.12
0.66 0.86 0.070 0.080 0.085 0.080 0.10
0.56 0.80 0.070 0.075 0.080 0.070 0.095
0.49 0.70 0.062 0.070 0.078 0.065 0.090
0.43 0.61 0.059 0.067 0.074 0.060 0.075
1. When ordering, please specify testing code:
ML512PJB106MLZ
Testing: Z = COTS
H = Screening per Coilcraft CP-
SA-10001
N = Screening per Coilcraft CP-
SA-10004
C = Custom screening (please
specify when ordering)
2. Inductance tested at 100 kHz, 0.1 Vrms
using an Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP
8753ES or equivalent.
5. Typical DC current that causes the specified
inductance drop from its value without cur-
rent.
6. Typical current that causes the specified
temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
© Coilcraft, Inc. 2011
®
Specifications subject to change without notice.
Please check our website for latest information. Document ML587-1  Revised 12/06/10
1102 Silver Lake Road
Cary IL 60013
Phone [phone]
Fax [phone]
E-mail [e-mail]
Web www.coilcraft-cps.com