|
ML433PYA Datasheet, PDF (1/3 Pages) Coilcraft lnc. – High Reliability Power Inductors | |||
|
4020 POWER INDUCTORS
High Reliability Power InductorsâML433PYA
â High temperature materials allow operation in ambient
temperatures up to 155°C
â Exceptionally low DCR â 5.81 mOhm
â Soft saturation makes them ideal for VRM/VRD applications.
â Part number1
ML433PYA221MLZ
ML433PYA401MLZ
ML433PYA601MLZ
ML433PYA102MLZ
ML433PYA152MLZ
ML433PYA222MLZ
â Inductance2
±20% (µH)
0.22
0.40
0.60
1.0
1.5
2.2
Terminationsâ Tin-silver over copper.
Core materialâComposite
Weightâ 0.17 â 0.18 g
Ambient temperatureâ â55°C to +105°C with Irms current, +105°C to
+155°C with derated current
Storage temperatureâ Component: â55°C to +155°C.
Tape and reel packaging: â55°C to +80°C
Resistance to soldering heatâ Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)â 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packagingâ 1000/7â³reel; 3500/13â³ reel
Plastic tape:â 12 mm wide, 0.23 mm thick, 8 mm pocket spacing,
2.3 mm pocket depth
âDCR (mOhms)3 âSRF (MHz)4
typâââmax
minâââtyp
5.81
7.55
9.50
13.25
21.45
35.20
6.40
8.30
10.45
14.60
23.60
38.70
153
191
116
145
85
106
63
79
51
64
42
52
â Isat5
(A)
18.7
12.5
10.4
8.7
7.1
5.6
â Irms (A)6
20°C riseâ40°C rise
12.0
16.8
10.0
14.0
7.9
11.7
6.7
9.6
5.2
7.5
4.0
5.5
1. When ordering, please specify testing code:
ML433PYA222MLZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A or equivalent.
5. Typical dc current at which the inductance drops 30% from its value without current.
6. Typical current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 âSoldering Surface Mount Componentsâ before soldering.
Irms Testing
Irms testing was performed on 0.75 inch
wide à 0.25 inch thick copper traces in
still air.
Temperature rise is highly dependent on
many factors including pcb land pattern,
trace size, and proximity to other compo-
nents. Therefore temperature rise should
be verified in application conditions.
© Coilcraft, Inc. 2012
®
Specifications subject to change without notice.
Please check our website for latest information. Document ML806-1â Revised 01/18/12
1102 Silver Lake Road
Cary IL 60013
Phone 800-981-0363
Fax 847-639-1508
E-mail cps@coilcraft.com
Web www.coilcraft-cps.com
|
▷ |