ML414PJB Datasheet, PDF (1/2 Pages) Coilcraft lnc. – High-Reliability Power Inductors

3314 POWER INDUCTORS
High-Reliability Power Inductors ML414PJB
■ High temperature material allows operation in ambient
temperatures up to 155°C
■ Special construction allows it to pass vibration testing to
80 G and shock testing to 1000 G.
Core material Ferrite
Terminations  Silver-palladium-platinum-glass frit.
Weight  44.1 – 46.5 mg
Ambient temperature  –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature  Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging  1000/7″reel
Plastic tape:  12 mm wide, 0.3 mm thick, 8 mm pocket spacing,
1.52 mm pocket depth
Recommended pick and place nozzle  OD: 3.3 mm;  ID: ≤ 1.65 mm
^  Inductance DCR
^  ±20%^{2  } max^{3   SRF (MHz)4}
  _{Part number}1
(µH) (Ohms) ^  min  typ
ML414PJB102MLZ
ML414PJB222MLZ
ML414PJB332MLZ
ML414PJB472MLZ
ML414PJB562MLZ
1.0 0.055 150 215
2.2 0.100 98.0 140
3.3 0.145 80.5 115
4.7 0.175 60.2 86
5.6 0.220 51.8 74
ML414PJB682MLZ 6.8 0.240 50.4 72
ML414PJB822MLZ 8.2 0.270 42.0 60
ML414PJB103MLZ 10
0.330 38.5 55
ML414PJB153MLZ 15
0.440 31.5 45
ML414PJB183MLZ 18
0.575 25.9 37
ML414PJB223MLZ 22
ML414PJB333MLZ 33
ML414PJB473MLZ 47
ML414PJB563MLZ 56
ML414PJB683MLZ 68
0.720 23.8 34
0.920 18.9 27
1.40 15.4 22
1.55 13.3 19
1.80 11.9 17
  _{Isat (A)}5 _{   Irms (A)}6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
1.8 1.9 1.9 1.3 1.7
1.1 1.4 1.5 0.96 1.3
0.98 1.2 1.3 0.80 1.1
0.97 0.99 1.0 0.72 1.0
0.92 0.95 0.98 0.66 0.88
0.82 0.83 0.86 0.66 0.88
0.58 0.75 0.78 0.56 0.80
0.56 0.66 0.70 0.52 0.70
0.46 0.56 0.59 0.50 0.66
0.44 0.51 0.54 0.42 0.54
0.44 0.48 0.49 0.36 0.48
0.30 0.38 0.40 0.34 0.46
0.28 0.33 0.34 0.28 0.38
0.26 0.30 0.31 0.26 0.34
0.22 0.26 0.29 0.24 0.32
1. When ordering, please specify testing code:
ML414PJB105MLZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the
same for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or
equivalent.
5. DC current that causes the specified inductance
drop from its value without current.
6. Current that causes the specified temperature
rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Compo-
nents” before soldering.
ML414PJB823MLZ 82
ML414PJB104MLZ 100
ML414PJB124MLZ 120
ML414PJB154MLZ 150
ML414PJB184MLZ 180
2.00 9.8 14 0.20 0.24 0.26 0.23 0.31
2.75 9.1 13 0.19 0.23 0.24 0.21 0.30
3.45 7.7 11 0.19 0.21 0.22 0.18 0.24
4.10 7.0 10 0.16 0.19 0.20 0.16 0.22
4.80 6.3 9.0 0.14 0.17 0.18 0.15 0.20
ML414PJB224MLZ 220
ML414PJB334MLZ 330
ML414PJB474MLZ 470
ML414PJB564MLZ 560
ML414PJB684MLZ 680
6.00
9.30
12.0
14.0
18.5
4.90 7.0 0.14 0.16 0.17 0.13 0.18
4.20 6.0 0.11 0.12 0.13 0.10 0.14
3.15 4.5 0.080 0.11 0.11 0.10 0.13
3.15 4.5 0.095 0.105 0.11 0.090 0.12
2.80 4.0 0.092 0.100 0.105 0.080 0.10
ML414PJB824MLZ 820 24.0
ML414PJB105MLZ 1000 31.0
ML414PJB155MLZ 1500 44.0
2.59 3.7 0.086 0.099 0.100 0.070 0.090
2.10 3.0 0.090 0.099 0.100 0.065 0.080
1.89 2.7 0.080 0.086 0.090 0.050 0.060
© Coilcraft, Inc. 2012
Document ML541-1  Revised 09/24/12
®
1102 Silver Lake Road
Cary, IL 60013
Phone [phone]
Fax [phone]
Email [e-mail]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.